API SHAKER SCREEN

A 3 phase decanter centrifuge is a type of solids control equipment that is used to separate two liquid phases from one solid phase. It works by using centrifugal force to separate the different densities of the liquids and solids. The solids are then discharged from the centrifuge, while the liquids are recycled back into the process.

3 phase decanters are commonly used in the oil and gas industry to separate oil from water and sand. They are also used in other industries, such as the mining and food processing industries.

The solids control system in a 3-phase decanter centrifuge is designed to operate in a continuous manner. The mixture of liquids and solids is fed into the centrifuge at a constant rate by a pump, and the solids are discharged at a constant rate. The control system ensures that the centrifuge operates at the correct speed and that the flow of liquids and solids is balanced.

The efficiency of a 3-phase decanter centrifuge is affected by a number of factors, including the density of the liquids, the size of the solids, and the speed of the centrifuge.

The speed of the centrifuge also affects the efficiency of the decanter. The faster the centrifuge rotates, the more centrifugal force is applied to the liquids and solids, and the more efficient the separation process is. However, if the centrifuge rotates too quickly, it can damage the screw propeller and the rotating bowl. In general, a high-speed centrifuge is designed with a speed of 3000-3500 RPM, which is effective to seperate fluid, oil and solids at the same time.

The discharged mud will be transferred by the auger, the oil will be collected and reused, and the fluid will flow back to the tank, which is mounted with agitators and mud guns Usually, A hopper is also connected to the tank, which is used for making new mud that flows back to the drilling bits and reusing.

If you want more details, please contact me with samuel@gnsolidscontrol.co

GN Solids Control, a leading manufacturer of solids control equipment, has delivered 18-inch decanter centrifuges to an offshore drilling platform. The centrifuges will be used to separate solids from drilling mud, which is essential for maintaining the integrity of the drilling fluid and preventing formation damage.

The centrifuges are designed to operate at high speeds, up to 3500 rpm, which allows them to remove even the smallest solids from the drilling mud. The centrifuges are also equipped with several features that make them well-suited for use in offshore environments, including a corrosion-resistant design and a self-priming system.

The delivery of the centrifuges marks a significant milestone for GN Solids Control, as they are the first API-certified manufacturer in China. GN is confident that the centrifuge will meet the demanding requirements of offshore drilling operations and help ensure drilling projects’ safety and reliability.

GN’s products are used in various applications, including drilling mud recycling, wastewater treatment, and replacement API shaker screens. GN Solids Control is committed to providing its customers with innovative and reliable products that meet the highest quality standards.

For more information, please contact me at samuel@gnsolidscontrol.co

The Dubai solids control equipment market saw increased trading activity, as oil and gas companies in the region continued to invest in new drilling projects.

According to industry sources, trading volumes for solids control equipment in Dubai increased in June. The most popular types of solids control equipment traded in Dubai during the month were shale shakers, desander, desilter, and centrifuges.

The increased trading activity in the Dubai solids control equipment market is being driven by a number of factors, including the rising demand for oil and gas in the region.

The UAE is a major oil and gas producer, and the government is planning to invest heavily in the development of new oil and gas fields in the coming years.

In addition, the Dubai solids control equipment market is also benefiting from the growth of the shale gas industry in the region. Shale gas is a type of natural gas that is trapped in shale formations. Shale gas extraction requires the use of solids control equipment to remove solids from the drilling fluids.

The increased trading activity in the Dubai solids control equipment market is expected to continue in the coming months. The UAE is a major hub for the oil and gas industry in the Middle East, and the demand for solids control equipment is expected to remain strong in the region.

The equipment market for GN solids control in Dubai is growing rapidly. GN Solids Control is a leading provider of solids control and waste management equipment for the oil and gas industry. GN has a strong reputation for quality and innovation, and its products are used by some of the largest oil and gas companies in the world.

Shale shaker screens are an essential part of any drilling rig. They are used to remove solids from drilling mud, which helps to prevent formation damage and improve the efficiency of the drilling process.

In the past, there was no standard for shale shaker screens. This led to a variety of screen sizes and specifications, which made it challenging to ensure that the right screen was being used for the job. This could lead to problems such as clogged screens, lost production, and even safety hazards.

API 13C is a standard for shale shaker screens to address this issue. It specifies the physical properties of shale shaker screens, such as the cut point, conductance, and non-blanked area. This ensures that all API 13C-certified screens meet the same high standards, regardless of the manufacturer.

API 13C shale shaker screens offer a number of benefits, including:

Improved safety: API 13C certified screens are designed to prevent solids from clogging the screen, which can lead to a number of safety hazards, such as fires and explosions.

Increased efficiency: API 13C-certified screens are designed to allow drilling mud to flow freely, which helps to improve the efficiency of the drilling process.

Reduced costs: API 13C-certified screens are designed to last longer than non-compliant screens, which can help to reduce the overall cost of drilling operations.

When choosing an API 13C shale shaker screen, there are a few factors you need to consider:

The type of drilling mud you are using: Different types of drilling mud require different screen sizes. For example, water-based muds typically require a finer screen than oil-based muds.

The size of the solids you are trying to remove: The cut point of the screen determines the size of the solids that will be removed. For example, a screen with a cut point of 100 mesh will remove all solids larger than 100 mesh.

The flow rate of the drilling mud: The conductance of the screen determines how much drilling mud can flow through the screen per unit of time. For example, a screen with a conductance of 10 kD/mm will allow more drilling mud to flow through the screen than a screen with a conductance of 5 kD/mm.

Once you have considered these factors, you can choose the API 13C shale shaker screen that suits your needs.

GN Solids Control is the first API-certified shale shaker screen manufacturer in China. The feature of the GN shaker screen are:

Automatic Robot Welding of the steel frame to have better quality and consistency.
High-quality fiberglass to improve plastic quality and screen
temperature resistant to 140 °C degree.
The composite frame screen is repairable to save cost.
Compared to the metal frame, the composite frame’s useable area is 10% to 20 % larger.
Since the composite frame is covered by plastic, it is rust-resistant for long time storage up to over 5 years.

If you are interested in GN Shaker Screens, please send an email to samuel@gnsolidscontrol.co

At the CIPPE exhibition, GN had shown two centrifuges: A big bowl centrifuge and a 3 phase centrifuge. What’s the difference?

Centrifuges are machines that use centrifugal force to separate solids from liquids. The centrifugal force is created by spinning the centrifuge at high speed. The faster the centrifuge spins, the stronger the centrifugal force.

The solids in a slurry are denser than the liquids, so they are pulled to the outside of the centrifuge bowl by the centrifugal force. The liquids, on the other hand, are less dense than the solids, so they are pulled to the center of the centrifuge bowl.

The solids and liquids are then separated by a series of baffles in the centrifuge bowl. The solids are discharged from the centrifuge at the bottom of the bowl, and the liquids are discharged from the centrifuge at the top of the bowl.

The rotating speed of the centrifuge is a major factor in how effectively it can separate solids from liquids. The faster the centrifuge spins, the stronger the centrifugal force, and the more effective the centrifuge will be at separating solids from liquids.

However, it is important to note that rotating speed is not the only factor that affects the performance of a centrifuge. The density of the solids, the viscosity of the liquid, and the design of the centrifuge also play a role.

Centrifuges are essential tools for the mud system in solids control and waste management.

If you are looking for a way to remove solids from liquids, a centrifuge may be the right solution for you. For more details, please also contact me at samuel@gnsolidscontrol.co

Recently, I received an email about hex shaker screens. I thought it would be helpful to share some information about these screens with you.

What is a hex shaker screen?

A hex shaker screen is a type of screen that is used in shale shakers. Shale shakers are pieces of equipment used in the oil and gas industry to remove solids from drilling fluid. The shaker consists of a series of screens that are vibrated to create a centrifugal force that throws the solids out of the fluid. Hex shaker screens are made of a hexagonal mesh that is designed to trap solids more effectively than traditional square mesh screens.

Why use hex shaker screens?

There are several benefits to using hex shaker screens in shale shakers. First, they are more effective at trapping solids than traditional square mesh screens. This is because the hexagonal shape of the mesh creates a larger surface area for the solids to adhere to. Second, hex shaker screens are less likely to clog than square mesh screens. This is because the hexagonal shape of the mesh allows the fluid to flow more freely through the screen. Third, hex shaker screens are more durable than square mesh screens. This is because the hexagonal shape of the mesh is less likely to tear or warp.

What are the advantages of GN hex screens?

• Larger usable area: GN hex screens have a usable area that is 10-20% larger than the metal frames of OEM screens.
• Rust-resistant: Compared with OEM screens, GN hex screens are made with composite frames that are resistant to rust, making them ideal for long-term storage.
• High-quality fiberglass: The composite frames of GN hex screens are made with high-quality fiberglass, which improves the plastic quality and makes the screens resistant to temperatures up to 140°C.

What are the applications of hex shaker screens?

Hex shaker screens can be used in a variety of applications in the oil and gas industry. They are commonly used in shale shakers, but they can also be used in other types of equipment, such as mud cleaners and desanders/desilters. Hex shaker screens are also used in other industries, such as the mining and water treatment industries.

Where to buy GN hex shaker screens?

GN Solids Control is the first API-certified manufacturer of hex shaker screens. We make and supply most API screens including hex screens. If you are interested in purchasing hex shaker screens, please contact me at +8618034263511.

A company in Oman that manufactures tools, instruments, casts, and kits has recently requested 40B vacuum pump spares like seals, valves, air hoses, and gaskets.

GN 40B vacuum pump is a type of vacuum pump that is used in a variety of applications, including oil and gas, water treatment, and mining. They are known for their high efficiency, reliability, and durability.

The company in Oman is looking for 40B vacuum pump spares because they are experiencing a high demand for their products. They need the spares to keep their pumps running smoothly and efficiently.

GN manufacture 40B pump spares and we have a lot in stock and can ship them quickly and easily.

 

In addition to 40B vacuum pumps, GN also offers a variety of other

 spares, including mud guns, agitators, hoppers, and API shaker screens. Mud guns are used to inject fluids into the ground during drilling operations. Agitators are used to mix fluids and solids. Hoppers are used to store mud in a mud tank. API shaker screens are used to filter fluids.

GN Solids Control is committed to providing its customers with the best possible products and services. They offer a wide selection of products, competitive prices, and excellent customer service.

If you are looking for 40B vacuum pump spares or other spares, please contact me to request a quote. My email is samuel@gnsolidscontrol.co

The GN Vertical Cuttings Dryer (VCD) is a solids control equipment specially designed to treat OBM and SBM waste. It uses centrifugal force to dry drilled solids in oil or synthetic base fluids. The VCD can reduce the moisture content of cuttings to below 5%, which helps to reduce waste volume and meet environmental objectives.

The VCD is typically used in conjunction with a decanting centrifuge. The centrifuge further reduces the moisture content of the recovered mud, making it easier to transport and dispose of.

Most clients choose to mount the VCD and centrifuge on a telescopic skid. This allows the equipment to be easily moved and transported. The recovered solid mud from the centrifuge can drop into the tanks below, without requiring a transfer pump.

The VCD is fed with a 4kW screw pump. The centrifuge is fed with a 7.5kW screw pump. Both pumps are made by the German company NETZSCH. The major components of the pumps are made in Germany and assembled in China.

We can provide you with VCD and other equipment as options. If you have any questions and want to know more details please send me an email: samuel@gnsolidscontro.co

GN Solids Control is a leading manufacturer of API shaker screens. Our screens are made with high-quality materials and are designed to meet the demanding standards of the oil and gas industry. We offer a wide variety of screens to fit a variety of shakers, including NOV shakers.

Our screens are API certified, meaning they are guaranteed to meet the specifications of the API(American Petroleum Institute). This certification is important to our customers because it ensures that our screens perform as expected.

We are confident that our screens will meet the needs of our customers. Our screens are made with the highest quality materials and are designed to last. We also offer a wide variety of screens to fit a variety of shakers.

Here are some additional benefits of using GN Solids Control API shaker screens:

• Longer life: Our screens are made with high-quality materials that are designed to last. This means that you can expect your screens to last longer than screens from other manufacturers.
• Higher efficiency: Our screens are designed to remove more solids from the drilling fluid than screens from other manufacturers. This means that you can expect to see a higher efficiency in your drilling operations.
• Lower cost: Our screens are competitively priced. This means you can save money on your drilling operations without sacrificing quality.

If you are looking for high-quality, API-certified shaker screens, then GN Solids Control is the right choice for you. We offer a wide variety of screens to fit a variety of shakers, and we are confident that we can meet the needs of customers around the world.

If you have any questions about our screens, please do not hesitate to contact me at samuel@gnsolidscontrol.co We would be happy to answer any questions you have and help you choose the right screen for your needs.