Better Solids Control Manufacturer for Better Screens

GN Solids Control has been working in the
solids control equipment design and manufacturing for many years, with an
engineer team of more than 20 years experiences, GN Solids Control is familiar
with the solids
control shale shakers
, and also more professional in shaker screens than
other shaker screen companies.

The shaker screen’s quality affects the
shale shaker’s performance:

1. When the screen mesh is of better
material and well sealed, the service life of each screen is longer, and
enhances the whole efficiency of shale shakers. GN Solids Control use high
quality SS304 or SS316 for mesh cloth material of shaker screen
from reliable supplier.                                             

2. the rubber chosen for the shaker screens
Is important also, if the rubber is too hard, it couldn’t serve well for
sealing and the cushion function is less active. While if the rubber is too
soft, it could be easily worn. GN has tested its shaker screens on their own
shakers and also GN clients has used GN screens on their shakers of many
brands.                                     

3. the glue used between the screen mesh
and screen frame is important also, GN Solids Control chooses
an brand from North American supplier for the glues.

4. the screen frame material and screen
frame welding determines the service life of shaker screens. For shaker screen
frames GN has 2 options, the steel frame one and the composite material one. Both
welt by professional

Now, some of GN produced shaker screens are
for GN’s own shakers, and some are ordered by old clients for other USA or
European brands. Some other equipment manufacturers ask GN to help design the
suitable structure for their customized and special screens. And GN screens are
enjoying good fame. If you have inquiry, welcome to visit our website or
contact sales directly.

500GPM Mobile unit for HDD and water well drilling

GN Solids Control is China leading manufacturer
of compact design mud recycling
/ cleaning system
for HDD, CBM drilling and water well drilling. GN mud
desanding plant for micro tunneling, piling and other trenchless activities is
also sold well.

GN 500 GPM mud recycling system for HDD and
water well drilling has be dispatch for Middles East. The system is catering
for mobile unit, and can be used for water well drilling, horizontal
directional drilling (HDD), Coal bed methane (CBM drilling), as well as oil and
gas drilling.

Equipment included in the 500GPM Mobile
unit mud system:

1) GNZS703E-ZD shale shaker, 1 ea

It is a linear motion shale shaker with 3
panels. The shaker is equipped with back type feeding box for a lower feeding
height. In case the mud will be flowed to shale shaker directly through
pipelines.

Features of GNZS703E shale shaker

a. It utilizes the most reliable linear
motion for a stable performance.

b. The shaker model utilize pretention
screen, Each screen mounted by 2 ea wedge for fast screen changing.

c. The shale
shaker deck
of GNZS703E shaker is made from stainless steel material for a
better performance of anti-abrasive and longer lifetime.

d. The dumpling spring of the shaker is
steel material internal for more stronger and better performance of vibration
desorption. The spring external is protected with rubber sleeve to prevent
fingers involved in during operation.    

e. The vibration model is chose from
worldwide famous brand: Italy Oil or Martin.

2) GNZJ703E-8S desilter mud cleaner

It is the combination of a shale shaker
GNZS703E and 8 ea 4’’ desilter cone assembly. The 4’’ desitler cone is made
from PU material for long lifetime.

And the cone assembly is removable. In case
needed, the Operator can bolt off the desilter cone assembly and mounted a
feeder box and use it as a separator shale shaker.

3) Slurry pump 1 ea. In case mud maybe stocked
in mud pit, a slurry pump is used as backup.

3) Mud tank 1 ea. The mud
tank is equipped with container block for easy mounted and clocked on the
trailer.  

GNMS500B Drilling Mud System To Filipino Jobsite

Leading in the HDD industry for drilling mud taking,
GN have her standing as a professional solids
control equipment
/ system provider. Not only good quality, but also an
excellent soltuion supplier. Not only offering standard systems, which most
manufactures prefer to do, also delivering customized soltions, even when most
of us still recommend the standard treatments.
GNMS500B is a middlized alternative for the 500gpm capacity required projects.
Normally for adding, we use GNMS500D, for big HDD projects, we all use
GNMS500GL. While there even now are some projects, just at the center. Not like
normal piling, just have big particles, and only have to separate the biggest
particles. None like the bigger HDD jobs, need big tank hard drive volume. For
this project, assessed the site arrangement, the client would prefer to dump
the solids squander to the end, not the inside, then we rearrange often the mud cleaner postion.
Some sort of customization on a standard system.

Features of GN HDD CBM Mud Recycling equipment
Complete line Mud System: GNMS-200GPM / GNMS-350GPM and GNMS-500 GPM /
GNMS-1000GPM / GN1500 GPM Self-Contained Mud
Recycling System
.
Economical Equipments integration: Complete going mud equipments from a
individual source-GN Solids Control Manufacturing.
Fast moved compact system: Small footprint design with quickly connection for
removable components and most parts fixed when traveling meet transport
regulation.
Confident customer service: We can send each of our experienced engineers for
installment, and training up client engineers.
Mud Tanks Adaptable Options:
Skid Mounted or perhaps Trailer Mounted or Hydraulic Jack Up mud recycling
Aquaria available for your options.
For GNMS500B details, pls download all of our brochure from website:
In this project, the client is using some sort of famous Japanese bore adding
machine, and after checked the site by their industrial engineer, finally
choose to cooperate with our value.

Inventory Available Waste Cuttings Dryer Unit for Prompt Shipping

Machinery
manufacturers cannot fulfill the customer if they don’t have an adequate
inventory for main or maybe popular requested product within their warehouse.
GN Solids Control, though already the leader involving solids control equipment
suppliers in China market, is actually trying the best to make the inventory
for main equipment in the event any urgent request from clients.
Due to the slowing down on the drilling industry, almost all of the needs on
primary solids control equipment like shale
shakers
, mud cleaner even the mud
tank system
are doing the used ones. That may be no doubt a cold winter for
the brand new equipment providers. As a result of consistent efforts on
solutions innovation, competitive cost, most critical the stable performance,
GN solids control still could walk in the snowstorm steadily.

You never know when the market place will get better, so , precisely what GN
did is to retain enough stock and to discover the opportunity. Just like the
old telling, the opportunity always prefers to bump the door of who has
previously made adequate preparation. Including below picture shows:

GN new warehouse keeps Up and down Cuttings Dryer unit intended for prompt
delivery
Vertical cuttings dryer unit is the key devices in drilling waste cuttings
drying system, by using this type of system, the driller could easily get a
pitless mud system to save drilling cost through recovery more fluids and also
discharge less solid squander. GNCD930
cuttings dryer
model has already proved by many huge in oil industry
including Baker Hughes, Shell, CNPC, SINOPEC, Greatwall drilling, Shengli
oilfield etc . It could be manage at 900RPM to get 4 hundred G force and
1200RPM to get 750. The adjustable speed is also available.

Suppose the customer buys a cuttings dryer unit, however , absolutely no
decanter centrifuge to enhance the effluence out from the cuttings dryer? No
worry about in which, GN already thought about this specific. That is why there
are 20 products 14” centrifuge kept from the warehouse. GNLW363CG is the best
lover for GNCD930 in spend management system. Besides, this kind of model
centrifuge could also be employed in barite recovery and typical fine solids
separation. 3200rpm / 2700rpm /2200rpm, various speed for different
application, only tell GN what task you want to do, and then we can recommend
the suitable speed for you. GN’s 14” centrifuge speed could possibly be
adjusted by changing the particular pulley or even equipped with a clever PLC
variable frequency generate control panel.

If you have any kind of request on the cuttings dryer and decanter centrifuge,
simply no hesitate to take up you telephone and dial us.

Two Options for Waste Cuttings Disposal: Thermal Desorption & Solidification

The
rules of drilling industry in order to dispose the waste cuttings requests as
less squander cutting disposal as possible. That no doubt pushes the going
contractor to find a better remaining solution to avoid the disturbing
originating from of environmental protection office.
There are 2 options, although not limited, for final convenience of the
discharged waste through the drilling process or some different industrial.
One is to get hot the waste sludge to split up the solids, water along with
oil. This method is called winter desorption treatment. When the going mud is
oil based, the particular discharged waste cuttings through the primary solids
control products
may include water, oil in addition to cuttings. The sludge
is actually firstly conveyed to a huge rotating drum which is often divided
into several compartments. Throughout each of the department, the heating up
temperature would be adjustable regarding the separation purpose. Often the
drum would be injected nitrogen to prevent the burning of the useful oil. The
water and necessary oil would be heated turn into gasoline and then be guided
in a cooling unit, here this and oil would liquefy to realize the separation. Often
the separated oil could be gathered for selling or applied as the fuel of the
energy desorption unit.

It is worthy of to mention is the thermal desorption is always for the waste
sludge with less water written content, otherwise the recovered acrylic value
would not cover the intake of energy like electricity along with fuel.
Differ from the energy desorption, the solidification procedure is especially
used for the water bottom part waste. The waste renforcement unit could mix
often the waste sludge and the renforcement reagent. In this process, often the
hazardous material in the waste material would be isolated as the sludge would
form into inadmissible compounds. Thus the addressed solids could be discharged
and also used for road paving and since construction material.
No matter regardless of what would be adopted, the drilling contractor would
always pre-treat the waste cuttings simply by use the waste cutting drying out
equipment to make the waste significantly dryer so that less gas will be
consumed in warming or fewer reagents can be used during solidification course
of action. The mostly used drying out equipment would involve cuttings dryer, high G push
drying shaker and waste materials decanter
centrifuge
.
GN Solids Control now could supply the solidification unit and total list of
waste cuttings drying out equipment. If you are interested, this is our website
for more information.

Related Posts

GN Drilling waste decanter centrifuge for 1500hp rig

GN
engineer only came back from a rig construction site for the commissioning of
GN drilling waste dryer system for a Nigeria drilling firm. It is a reputable
drilling corporation. All their rigs are major oil and gas drilling rig 1500hp.
Mostly, they use OBM (oil based mud) or SOBM for drilling. WBM (water base mud)
is not typically used. So waste management system is necessary for them. Just
one the one hand, it is ask by the company for setting protection. On the other
hand, it can recuperation drilling mud for using again, and save their going
cost on chemicals regarding drilling fluids.
Drilling spend equipment GN offered to typically the Nigeria drilling company
1) Drilling
waste decanter centrifuge
GNLW363C-VFD
GNLW363CG-VFD decanter centrifuge is the most popular model to get drilling waste
management
arena. It is the latest design coming from GN group. It is a 12
inch variable frequency generate decanter centrifuge with utmost. speed
3900rpm.

2) Top to bottom cutting dryer GNCD930
Up and down cuttings dryer is popular together with decanter centrifuge
intended for OBM (oil base mud treatment). The VG dryer is made and designed by
GN Solids Control. GN Solids
Control is the No . one particular manufacturer for drilling waste material vertical cuttings dryer
marketing.

3) Screw pump take care of drilling waste transfer
Attach pump can transfer mud and feed for decanter centrifuge. The screw pump
GN cooperate with a A language like german company NETZSCH. All body fluids
touch material made from Metal 316L. GN can provided good quality with good
price tag.
4) Screw auger conveyer in difference sizes along with transfer length for
waste material cuttings transfer.
GN regular screw conveyer is with 16 feet length for each portion. Customer can
choose 1 portion ~ 4 section for getting length 12 ft, twenty four ft, 36 ft or
even 48 ft. Auger length have 12 in, 12 in and 18 quite a few option.

GN can delivers customized solutions on the drilling waste management field
Delightful you contact GN team freely for solution.

Related Posts

GN drilling waste manage System with regard to Middle East

GN Solids Control is
a leading supplier providing solids control and also drill cuttings management
programs for global clients. Numerous large drilling company or maybe oil
service companies are utilizing GN equipments to treat often the OBM, WBM or
BINQ.
GN decanter centrifuges and also
cuttings dryers
are competing equipments even when compare with UNITED
STATES brands or European manufacturers. With the establishment of GN Solids America LLC within
Houston, GN Solids Control is getting to known through more and more drilling
companies on the planet. GN also has one department company in Moscow.
Typically the America is one large sector for GN, it’s a similar for Middle
East. GN delivered more than ten units cuttings dryer to Center East in last
year. Many of these equipment s are also providing with screw conveyors and
also flushing pumps.

GN drill down cuttings management systems like these equipments:
1 . GN Vertical Cuttings Dryer: a single set
Variable speed dryer can be adjusted by the VFD feel screen. GN used well-known
brands electrical brands for instance ABB or Siemens and so forth
2 . GN Decanter
Centrifuge
: 1 set
GN decanter centrifuge is a cost-effective breaking up machine in the oil and
gas location. Due to the perfect quality components, it can be used for a long
time. GN professional engineers have been updating this centrifuge from the
beginning. De dos niveles stainless steel are used for the turning bowl.
Hundreds of tungsten carbide tiles are also fixed for the screw conveyors for
while usage.
3. GN Mud Tank
Mud tank is actually fixed on a compact skid for convenient move.
four. GN Screw Conveyor: two sets
GN screw conveyors are widely used in send drill cuttings in huge density and
viscosity. The important angle is usually within thirty five degree.
5. GN Mess Pumps: 2 sets
Just one set pump for flushing the cuttings dryer just in case the screen
basket obstructed. The other set is used to help pump the drill cuttings into
the decanter centrifuge.

Shale Shaker & Mud Cleaner & Decanter Centrifuge stock in America

GN Solids America set office and storage
facility in Houston America all of us keep stock for shale shaker, mud cleaner along with
decanter centrifuge in Freeport to sell. All the equipment tend to be following
US standard and keep service there to have sure clients receive great service
and equipment support.

There are 2 models that will popular for US market, GNZS703 shale shaker which
is a several decks model with ability 500 GPM mud stream at 40 mesh screen
size. GNZS594 shale shaker is a 4 decks unit with capacity 600 GPM mud flow at
forty five mesh screen size that is certainly narrower and longer. Typically
the shaker deck is Q345 material and heat addressed for better performance. The
GNZS594 model can install upvc composite material screen which will prolong
screen performance life. two sets of vibrator mounted to supply G force bellow
7. 5 G through opposite rotating driven simply by 3 phase generator. a few sets
of shale shaker can share one skid to make delivery easier with regard to
convenient.

There are different style of decanter centrifuge but GNLW363 decanter
centrifuge
is the most well-known model for oil and gas going solids
control system or maybe drilling waste
management
the high speed centrifuge, the turning speed reaches to 3200
RPM. One set of VFD control panel can be an optional to modify centrifuge speed
0 : 3200 RPM depending on diverse condition and requirement. There are actually
tungsten carbide tiles bolted on screw impeller with regard to help protect
centrifuge attach and flexible to replace tungsten carbide tiles. The
centrifuge dish material is stainless steel intended for protection. There are
bigger as well as smaller size of decanter centrifuge for optional depending on
various drilling requirement..

GN 500GPM Mud Recycling System for HDD Client

GN Solids Control has provided many sets of mud
recycling systems
for various mud control area or industries, such as HDD,
TBM Drilling, CBM Drilling, Bored Pile Drilling etc. Just in this May, GN
Solids Control just provided one set of 500GPM mud system in HDD area.
GNMS-500GL is one of the most cost-effective mud recycling systems and widely
used in the global world. GN also has some other mud systems to meet treating
capacity demands, such as 200GPM, 1000GPM. Some other customized mud recycling
systems can also be provided based on customers’ working conditions. 

This GNMS-500GL mud system has been successfully working for more than 3
project s during the past 5 months. At the beginning, GN sent service engineers
for installation and debugging. For clients need training or commissioning
service, GN can also send out their engineers.
GNMS-500GL mud system includes the following main equipments: shale shaker, mud cleaner, mud
hopper, mud tank.
Some auxiliary equipment such as mud agitators, mud
mixing hoppers, centrifugal pumps are also included in this system.
GN mud recycling systems are very popular in many regions or countries, such as
South America, Africa, Middle East, Australia, India, Korean, Burma and
Indonesia etc.
With the fast development of GN Solids Control, GN mud systems are exported to
over 60 countries. Most of those GN mud systems are being used in abroad,
nearly 70% are exported from China. And with the establishment of GN Solids
America LLC, GN solids control equipments and drilling
waste management systems
are widely known by North American companies.
GN Solids Control also provides decanter centrifuge, cuttings dryer, Hi-G
shaker for WBM, OBM or SBM treating. At the beginning of 2015, GN also provided
some sets of solidification unit to treat the drilling cuttings separated after
cutting dryer, centrifuge. In the near future, GN will launch a newly upgrade
cutting dryer to treat the WBM especially.

Related Posts

GN 350gpm HDD mud system for Sale

We have over 70%
project from oil & gas drilling. The other 30% sales amount is from
HDD/CBM/WATER WELL DRILLING application, we offer compact
mud system
for this area and the feedback is very good. Recently, we have
one 350gpm standard design mud system for sale. The mud system can used for HDD
drilling / CBM drilling / water well rig drilling. The 350gpm mud system
including:

image

1) one mud tank with all the solids
removal equipment upsides.

2) one double
deck shaker with 4ea 4’’ desilter
cones. The drilling mud can be treated by double deck shaker first, then
centrifugal pump can feeding the drilling mud to desilter for further
treatment, after that particles above 25microns can be separated, and the
drilling mud can go to mud mixing tank with mud hopper to get correct mud
property and for reuse.

3) one mud agitator to
mixing the mud & suspending the mud

4) one mud
hopper for adding more chemicals to adjust the property of the drilling mud
before feeding for HDD rig machine.

We just have
this mud system showed in Australia show, pls see more from website:

http://www.gnsolidscontrol.com/drilling-fluids/gn-mud-recycling-system-in-2015-australia-no-dig-show

Except for 350gpm mud system, GN Solids Control can also offer other
capacity mud system from 200gpm mud system/350gpm mud system/500gpm mud
system/700gpm mud system /1000gpm mud system etc.  Our technical team makes it to standard
design for all the mud system and make it easy for transportation and
operation. For details, pls read from GN website:  HDD & CBM Mud Recycling System, http://www.gnsolidscontrol.com/hdd-equipment/

image

Except for compact mud system, GN Solids Control also offer big
capacity mud system for oil & gas drilling. We have domestic client like
COSL buy 4 sets of 1000gpm mud system for offshore drilling in year of 2014. And
also buy 1 sets 17sets mud tanks mud plant system from us in year of 2014. Pls
read more from GN website: http://www.gnsolidscontrol.com/drilling-fluids/1000hp-drilling-rig-solids-control-mud-system

Any requirements, pls contact us freely.

Related Posts