Author: gnadmin

A total drilling rig system usually contains drilling floor block, mud solids control block and recovery, mud pump and power block. Concerning these, the mud solids control and recovery block is composed of drilling mud recycling and drilling waste cuttings system. This block can be used to maximally recover the valuable drilling mud as well as decrease the waste discharge. 

The drilling waste cuttings management system occasionally called the further treatment method for solids control. Since the cuttings was delivered from out interface of the primary solids control equipment like shale shaker and mud cleaner towards the cuttings dryer device. The principal equipment for drilling waste cuttings recovery consists of cuttings transferred equipment, Verti G cuttings dryer, feeding pump and decanter centrifuge.

The cuttings transferred devices is being regarded as a bridge connecting the primary solids control system to the waste management unit. The typical and well-liked approach to transfer the cuttings is to utilize the screw conveyor and hose pump.

What is the Difference of the screw conveyor and hose pump

The screw conveyor itself has a gathering groove and the screw propeller push the cuttings to the Verti G cuttings dryer. Since the screw conveyor is engineered to shift the cuttings around an upright line. Usually, on the spot, there are not just 1 unit screw conveyor, several unit screw conveyors are situated crossing with certain angles so as to the waste cuttings can be delivered to the cuttings dryer. While the cuttings dryer feeding port is high, the screw conveyor is sloping. Subsequently if the waste cuttings are high liquid content, the liquid might be regurgitate and overflow off the conveyor.

The hose pump is a new, multifunction and multipurpose industrial pump. There is a particularly made rubber hose with smooth inside and high strength installed in the pump body. The hose pump has a exclusive structure with no sealing aspect, no leakage and no pollution. It has a high suction capability, self-cleaning capability, sucking material in two instructions. The hose installed in quite simple and operation is effortless, and the maintenance charge is low. The most essential is no block when pumping fluid with high viscosity and foreign substance content.

The drilling waste cuttings transferring equipment is important throughout the operation. GN Solids Control has applied both of the screw conveyor and hose pump in the design of the drilling waste management system, for more information and facts, please get in touch with GN freely.

GN Screw Conveyor
As the established of GN Solids America, GN is beginning to known as a famous solids control company from China. And with the excellent quality and good performance, GN solids control equipments are welcoming more and more clients in North America to our Houston warehouse. Some clients prefer to see these solids control equipments first and rent for trial use.
We believe as the days went on, GN will become a leading company in solids control and drilling waste management in the sooner future.
Today, we would like to give you a brief introduction about our screw conveyor (which is also known as auger). GN Solids Control has provided many sets of screw conveyors every year for worldwide customers.
For the screw conveyor, it is mainly used for transferring mud or solids, when it contains too much water, we don’t recommend using conveyor.
GN has some different types, from conveying capacity 20 tons per hour to 45 tons per hour. All these capacity can fulfill the general demands of mud transfer.

Sometimes, we have one screw conveyor with V type collection box. There are some flanges with pipes on the V type collection box. This kind of screw conveyor is especially used for oily sludge transfer. The quantity is different due to the length of screw conveyor.
Flanges and pipes on the V type box are used for providing hot steam, so the oily sludge can have a good flow ability. There is also one beam across this conveyor, it is used for distributing oily sludge to the two ends.
There is also one type of screw conveyor with heating system, which is equipped with pipes under the cylindrical part of conveyor. And this type is mainly suitable for cold environment. Lately, we also provided some set of these screw conveyors with heating system to Russia clients.

GN Solids Control Co has been working on solids control equipments and waste management systems for many years, and many clients are keep purchase these solids control equipments from GN every year due to the excellent quality and rest assured after sales maintenance.
Recently, GN Solids Control Co has provided many sets of solids control equipments for our client in Kuwait. This client has purchased GN equipments for th

eir work over drilling rig. When we cooperate with client at the beginning, we showed our willness to have a win-win cooperation by providing solids control equipments with good quality.
And this year this gave us a large order which including 8 sets of GN shale shakers ( the type is GNZS594E-HB), 4 sets of GN vacuum degassers (the type is GNZCQ 270), 4 sets of GN desanders, 4 sets of GN desilters, 32 sets of GN centrifugal pumps as well as 48 sets of GN mud agitators and 8 sets of GN mud hopper.

For the shale shaker, we designed and manufactured a mud distributor for two sets of shale shakers, here we call it dual connection GN shale shaker. So our client has 4 groups Dual Shaker, which has a very large treating capacity, because even one set of GN shale shaker can treating the drilling fluids upto 616 GPM m³/h.
Based on the above solids control equipments, it is obvious to know this is a three phase solids control system that our client wants to use.
1. Shale Shaker
GN shale shaker can separate solids to 100 microns. For this type of GNZS594, the dimension of shaker screens is 585mm X 1165mm, so the screens are replaceable with Swaco Mongoose screens.
2. Vacuum Degasser
The mud come from shaker will be sent to vacuum degasser to eliminate the air in drilling fluids. By using GN vacuum degasser, the drilling mud can be kept in a steady viscosity.
3. Desander and Desilter
GN desander and desiler can separate solids to 20 microns. The cylones on desander and desilter are all made of PU, which is really helpful to have a long time lifespan.

An Introduction of ZJ70D mud recycling system (II)
As we have talked last time, many world clients are coming to GN Solids Control Co for turnkey solutions on oil and gas industries. And GN is providing more and more drilling fluids control system for customers all over the world.
Regarding to ZJ 70D (2000 HP) system, we talked that this mud recycling system has 8 tanks for solids control. Today, let’s give you the brief introduction from what we end last time.
1. #5 Tank:
# 5 tank is a weighting and premixing tank. It has 2 separated compartments: one compartment is weighting compartment, with the volume of 52 m³ and effective volume 36.4 m³. The other one is heavy mud compartment, whose volume is 34m³ and effective volume is 23.8 m³.

On the top of this mud tank, it is equipped with 3 sets of mud agitator (15kw), 2 sets of mud guns. On the left end of this tank, it is mounted with 2 sets of weighting pumps (75kw). And on the bottom, the tank is fixed with 2 sets direct injection hoppers.
2. #6 tank:
This tank only has one compartment, which is used for supplying mud for centrifugal pumps. With the effective volume of 60.2 m³, this tank is fixed with 3 sets of mud agitator (15kw) and 2 sets of mud guns.
3. # 7 tank & # 8 tank:
For # 7 tank and # 8 tank, they are both storage tanks. And these two tanks are fixed with 3 sets of mud agitator (15kw) and 2 sets of mud guns.
4. Trip tank：
There are 1 set of mud agitator (15kw), 1 set of mud guns and 2 sets of feeding pumps mounted on this trip tank. The volume of this tank is 20 m³, while the effective volume is 14 m³.

At the end of this year, GN Solids Control is very busy with a large quantity of projects for various clients. This year, all GN engineers and workers are experiencing a very special year.
We have harvest a lot and improve our reputation; this year’s sale amount has been reached a new level until now. By establishing one American branch company which name is GN Solids America LLC, we have developing the American market step by step, and promote the sales amount to a satisfied amount.
And now we are busing with establish another branch company in Russia, at first the warehouse and office is in Moscow, the warehouse might change in the near future.

This year, we have attended many fairs both in other countries and at home. GN Solids Control are getting well known in many countries, such as America, Russia, Austria, Nigeria and some other countries. By attending oil fairs and make advertisement, as well as SEO on the web.
Just these several years, GN has attending many fairs, such as oil show in Abu Dhabi. And we are welcoming many clients from some famous oil and gas industries. Several days before, we welcomed a client from one of the largest famous oil service and consultancy company. This company would like to cooperate with us on solids control equipments. And from start, they are willing to start our cooperation from shaker screens. For Chinese domestic manufactures on solids control, they have checked with very strict demands among, and finally they choose us to be their partners. Right now, we are the only partner for them in China. And we are both devoted to expand our further business in the near future and establish win-win cooperation for a long time.
GN solids control are keep growing, and we do believe that with the strength of all GN people and with some creative ways to develop market, our excellent solids control equipments will win the heart of most oil and gas industries.

Recently, GN Solids Control(www.gnsolidscontrol.com) has manufactured a set of mud system for geothermal drilling, which will be delivered to Kenya. GN is specialized in designing and building up solids control system for oil and gas drilling, mud system for geothermal drilling, mud cleaning system for HDD drilling and tunneling. With its high quality and strict quality management standards and systems, GN has been the first API certified solids control company in China. This week, from Monday to Thursday, the customer visited GN factory for inspection. The testing was successfully finished, showing that the mud system performs well, though there were modification requirements posed by the customer. But before delivery, this system should be PVOC certified.

The full name of PVOC is Pre-Export Verification of Commodity. It is inspecting standards required by KEBS for exporting commodity to Kenya. If the commodity listed in PVOC content is inspected to be in compliance with PVOC, COC (certificate of commodity) will be issued for custom clearance; otherwise, the commodity will not be allowed into Kenya. GN mud system for geothermal drilling belongs to the catalog listed in PVOC, so COC is required for export; otherwise, GN mud system will not be allowed delivered to Kenya.

While the customer’s visit, we are also preparing documents required for PVOC. It is the first time we do this, so it is a little confusing and tough for us. But, with the help of an agent for PVOC, we finally summit the documents in this week, and it has been approved. The next step will be inspection of the commodity, it will happens last week. And is we get through the inspection, we will get the COC. Then GN mud system will be delivered to Kenya, and go into Kenya.

GN Solids Control has experienced many years’ successful growing in the past days. And these years, GN Solids Control is like a rocket and growing larger and larger in a fast speed. GN has established another branch manufacturing company close to Beijing, which means GN has two main manufacturing and designing centers in China. Besides, GN has one American branch company in Houston, TX and one Russian branch company in Moscow.
For such a large company, clients all over the world give fully support to GN’s growth, and we really appreciated their great help. To serve clients better and better is one of GN Solids Control’s persisting principles and dreams from some degree.
As it’s known to all, GN Solids Control equipment is under careful technical discussions with our clients, and manufactured perfectly by GN experienced workers.

For every solids control equipments, it need to be careful used too. One of the first important factors is the working environment. In order to perform well and for further easy maintenance, solids control equipments should comply with these following principles (take one set of ZJ30 drilling rig mud recycling system for example):
1. Three solids control phases for purification process：
1.1 GN Shale Shaker: screening
1.2 GN Desander: Separate solids diameter which is over 47μm.
1.3 GN Desilter: Separate solids diameter which is beyond 20μm。
2. GN Designed treating capacity：≤250 m3/h，Rated treating capacity：240 m3/h.
3. Temperature Condition：-20°～40°.
4. Mud Viscosity：≤80 S.
5. Climate: rain, snow or fog.
6. Work continuously in rated power.
7. Range of Working Height: Work regularly in areas less than 2500 meters above the sea level; may decrease the efficiency in those over 2500 meters above the sea level.
8. These equipments should follow the standards (SY/T5612-2007) Specification Drilling Fluids.

GN Mud tanks are widely used in solids control area, although the functions might seems quite resemble which are to storage the muds or wastes for different separation steps, all of these tanks play a vital important role in solids control.
Today we would like to share some info on how to design a GN mud tank roughly in a fast way.
To design a GN mud tank, we need to know the way that our customer going to transport in their region or the ship method to their country. Usually there are different land transportation limits in various countries, so these limitations are the first numbers we need to discuss with our customers. But all of these limitations are must be within a container.
So the second thing need to consider is the sea transport way. Will the solids equipment be put into container? Will the equipment be designed to the same size as the container? Or will the equipment be shipped in bulk? Depend on different shipping methods, the tank can be designed into different limited sizes.

If the tank is put into a container, the largest width is 2250 mm (including sand cleaning doors and lifting lugs); If the tank is designed as a standard container, than the largest width is 2588 mm; Or if the tank is a large capacity tank, the largest width is 2950 mm.
For all these tanks, we usually designed them with integer number, from 4m to 12m. It’s better the length is not beyond 13.5 m. If the tank (length is 6m) is made into 20 feet container, the length should be 6058mm; while for tank (length is 12m) is made into a 40 feet container, the length is 12192mm. Skid-mounted tanks should plus 250mm in both ends of the tank (which is 500mm in total), the final length is with 0.5m.
More details, we’ll share with you in our next blog.

Solids Control equipment combined with dewatering unit for processing mud

As we all known, GN Solids Control Company are specialize in providing turnkey solutions for customers on solids control and waste management systems. It’s important to provide customers with best quality equipments such as shale shakers, mud cleaners, decanter centrifuges and cuttings dryer etc. Some other auxiliary equipments are also quite important when it comes to show a perfect function for the whole system.
Today we would like to give you a brief introduction on GN mud degasser. Mud degasser is also called poor boy degasser sometimes.

GN mud degasser is a useful equipment to eliminate the gas from drilling fluids before the fluids is sent to solids control systems. Although the mud degasser is not always used in the drilling process, it’s quite important when there is much gas in the drilling fluids. Because too much gas can destroy the solids control equipment. For the gas separated from the drilling fluids, some of it might be SO2 which is very harmful for people’s health. So usually there is one flare igniter connected with the mud degasser, the harmful gases can be burnt in a quite far place.

The mechanical structure of GN mud degasser is very simple. Just take GNZYQ 1000A as an example, the tank diameter is 1000mm. Drilling fluids first run along with the inlet pipe which is 4 inch, then it will hit several baffle plates. Due to the large pressure, the collision force is big enough to separate the gas from drilling muds and run out from the outlet pipe which is 10 inch to a flare igniter or to some other faraway place.
For the after treated drilling fluids, it is sent to solids control system for further separation. Sometimes, there will be a vacuum degasser right in the back of shale shaker. The vacuum degasser is used to eliminate gases in small diameters. Different situations might need to use different equipments, so if you have any further questions, welcome to contact us directly.