Author: gnadmin

GN takes necessary measures for transporting protectionGN Solids Control has one branch company in Houston, TX. Some solids control equipments such as GN Shakers, GN mud cleaners and GN decanter centrifuges as well as some other spare parts such as GN shaker screens, GN mud guns, GN mud agitators are also stored.Experienced engineers have been sent to Houston branch for the after sales service and training work. GN is trying to provide excellent after sales service in the America market.Now all the solids control equipments are manufactured in Chinese factory in advance, then they are shipped to Houston warehouse. In GN Solids America warehouse, GN engineers will do some assemble work and test running work, every equipment will be fully tested before they are transported to our clients’ worksite. 

As many parts are quite vulnerable in transporting without some protecting measures. The principle of GN solids control is providing the brand new equipments with best quality. So GN engineers will take some necessary measures to keep solids control equipments in a very good condition.
Take GN decanter centrifuge as an example, due to the rotating bowl is quite heavy the two supporting bearings will be destroyed when its keep rotating on the way. So GN engineers will use two cloth belts to tighten the rotating bowl, and two steel bows are supporting the bowl and lighten the heavy load for the two bearings.
The Cover of the decanter centrifuges will be locked with bolts before transport. In order to move the decanter centrifuge conveniently, GN engineers fixed it on a wooden pallet. Some parts will be fixed on the pallet such as discharging port. VFD control panel will be located on a wooden pallet just like the decanter centrifuge.
Some other equipments such as shale shakers, they will be fixed tightly with large bolts in case they are vibrating during transporting.

GN Dewatering Unit with Flocculation System
As the fast development of GN Solids Control, GN has provided many sets of solids control systems to clients from various industries. Recently, GN got many inquiries on waste water management, some clients need to separate the clean water from drilling mud can d reused the water.
Although different projects are customized by different working situations, the working principle is pretty the same. Just take one of the dewatering unit that GN Solids Control provide several months before as an example.

This GN Dewatering Unit is composed by the following equipments:
1. GN Double Deck Shale Shaker
It’s used to separate solids that larger than 100 microns. Here we use GNZS706E-HB.
2. GN Desander
Desander is one type of shale shaker with large cylones, which can be used to separate solids larger than 50 microns. Sometimes, GN recommend to use desilter which is equipped with small cylones and can do much finer separation.
3. GN Flocculation Unit
The flocculation is used to add polymers into drilling fluids which can help to collect small diameter solids.
4. GN Decanter Centrifuge
The drilling fluids come from flocculation tank can be further separated by GN decanter centrifuge, which can separate the solids larger than 2 microns.
So after all the treatment by the above solids control equipments, clean water can be separated from drilling fluids or waste water and this clean water can be reused. For some strict demands, such as the discharged mud need to be pretty dry, GN Solids Control recommend to use vertical cuttings dryer.
By using GN vertical cuttings dryer, clients can deal with oil base mud (OBM), water base mud (WBM) and synthetic water based mud (SBM). GN has provided many sets of cutting dryer for mud separation. Based on the working performance, the oil can be separated to below 5% and the water can be separate to below 10%. For details, welcome to contact thomas@gnsolidcontrol.com.

Lately, Hebei GN Solids Control Co., Ltd, a specialist of drilling waste management system, has arranged the shipment of 1 unit of drilling cutting drying equipment to the West African customer. GN solids control is the first API solids control and drilling waste management equipment manufacturing company in China, and it has sold items to in excess of 60 nations. This isn’t the first order but a repeated order following the customer using GN product. Using the passing of environment rules, just about all drilling cuttings have to be dried to lessen pollution before discharge.

 The order that the customer required about the equipment shows up as below.

 1 unit GNCD930 vertical cutting dryer having a maximum speed of 900 Revolutions per minute along with a maximum G force up 420 centrifugal G force.

 2 models GNLW363 series 3200RPM high-speed decanter centrifuge with duplex stainless material on rotation bowl and screw propeller paid by tungsten carbide tiles.

 3 models screw pump sitting 30 cubic meters each hour for the use of feeding drilling liquids to decanter centrifuge and pressure washing for that vertical cutting dryer. Generally, the vertical cutting dryer is outfitted having a flushing pump to transfer waste water that is clean to purge screens.

 The Kodak play touch camcorder of drilling cuttings drying devices are to process the cutting that are separated in the mud with the first stage equipment-shale shaker and 2nd stage equipment mud cleaner. After released from shale shaker and mud cleaner, the cuttings is going to be directly moved in to the vertical cutting dryer via a screw convey or perhaps a hose pump, the liquid is going to be retrieved again, as the solids will end up dry enough to become released. GN drilling cuttings drying equipment happen to be offered to African nations like Egypt, Libya, Algeria, and Nigeria. The performance is pretty well. Welcome your RFQ of the drilling cuttings drying equipment.

Related Arciels:

• GN Mini Decanter Centrifuge
• Obtain Your Solids Control Equipment Choose GN Solids America
• The knowledge about mud cleaner
• GN New Decanter Centrifuge on 30% Discount
• Drilling cuttings decanter centrifuge at the jobsite

How to choose GN decanter centrifuge based on rotating speed

GN Solids Control Co. has been working on solids control and drilling waste management systems for many years, there are clients from over 60 countries are using GN products. With the fast development, GN moved to the new factory near Beijing several years ago, and GN has been building another factory which is quite near the current factory.

Last year, GN has established two branch companies in America and Russia, GN is working on the storage of solids control equipments and spare parts in these two branch companies. Right now, GN Solids America has 4 shale shakers, 2 mud cleaners, 2 decanter centrifuges in Houston warehouse, some other spare parts are also kept here.

As GN decanter centrifuge is quite popular, we have sold about 250 sets every year. Today we would like to give you some brief introduction on how to choose GN decanter centrifuge based on the rotating speed. The rotating speed as well as differential speed is quite important for the performance of decanter centrifuge. The largest rotating speed is not always the best solution.

1. For barite recovery, you can use GNLW452 at the rotating speed of 1800 RPM, while for GNLW363 you can use 2200 RPM fix speed.

2. For high gravity solids separation, we recommend to use GNLW452 or GNLW363 at the rotating speed of 2700 RPM. If equipped with cuttings dryer, you can use GNLW363 with 2700 RPM pulley.

3. For low gravity solids, we recommend to use GNLW363 equipped with the 3200 RPM pulley.

4. For solids control system, one set of GNLW452 and one set of GNLW363 is totally OK, the rotating speed can be 2700 RPM or 3200RPM.

5. It’s obvious that you can choose variable speed decanter centrifuge if you are not very clear about the solids condition. And you can change the rotating speed quite conveniently when the solids condition is changing at the same time.

GN Solids America LLC has been in TX for nearly two years. With the large help from GN Solids Control (Chinese headquarter), GN Solids America is acknowledged by more and more oil and gas companies.
GN Solids Control has many experienced engineers that working on solids control for many years, and GN has provided many sets of whole project solutions for global clients. From solids control in oil and gas industry to drilling waste management systems, and various drilling mud cleaning systems including HDD industry, CBM industry, Bored Pile and TBM industries, we have a large quantity of successful projects all over the world.
Now in order to help the American clients have much more confidence about GN solids control equipments, GN Solids America has promoting the rental policy in USA.

Many solids control equipments in Houston warehouse are available now, such as GN decanter centrifuge, GN shale shaker, GN mud cleaner, GN cuttings dryer and GN vacuum degasser. We provide the rental service for the above equipments, so GN clients can rent them for trial use. All the maintenance and repair work will be carried by GN technicians.
Now GN Solids America has been working on this rental service for some clients, GN decanter centrifuge and GN shale shaker are very popular. After used GN equipments for some time, our clients are quite satisfied with the performance and the maintenance service. Some of them are willing to purchase our equipments after several months’ usage.
GN Solids America always keep some storage in Houston warehouse, right now we have 4 shale shakers, 2 mud cleaners, 2 decanter centrifuges are available now. In the short time, there will be more shale shakers, decanter centrifuges, cuttings dryers and vacuum degassers arrived at our warehouse. More and more spare parts will be shipping along with these solids control equipments.

GN Solids Control send 2 sales to USA to explore the domestic market, and 2 technicians are prepared for the after sales service 24 hours, 7 days. GN has already hired a salesman of US citizen to help increase the sales amount of USA branch. And in the near future, GN Solids America will hire more and more employees from America.
For rental service, please visit GN Solids America at 6710 windfern road, Houston, TX 77040. http://www.gnsolidsamerica.com/solids-control-equipment-rental.html
Give us a phone call at+1-713-878-0880; Emai:thomas@gnsolidcontrol.com

GN Hi-G Shale Shaker and GN Vertical Cuttings Dryer for Shell
GN Solids Control has provided many sets of solids control equipments and drilling waste management systems to worldwide clients. These years GN has gained many successful experiences in drill cuttings managements systems.
Take one tailored set of drill cuttings managements systems for Shell as an example. This system is combined with one shale shaker in linear motion and vertical cuttings dryer work under vertical G force. For this cuttings management system, it can move in the linear motion and vertical motion.

This system mainly including:
1. GN Cutting Dryer
GN930C-VFD can treat drilling waste 30 T/H to 50 T/H, the effective treating capacity is around 35 T/H. Rotating speed is adjustable with 900 RPM. Now GN cuttings dryer is the only one in China can handle OBM and WBM at the same time. GN cuttings dryer can handle with synthetic base mud. Now GN Solids Control manufactures about 60 sets of cuttings dryer every year.
2. GN shale shaker
GNZS594HGE-LD shale shaker is especially designed for drying cuttings. The vibration G force is upto 8 G when working.
3. GN mud tank and pumps
Here we use two mud tanks, the shale shaker and cuttings dryer can be fixed in these two mud tanks separately. There are some other auxiliary parts such as feed pump and flush pump.
The working process of this system:
All the drilling cuttings must be separated by shale shaker in advance, then these solids will be transferred by screw conveyor to GN cuttings dryer. By using GN cuttings dryer, most of the fluids will be separated out. The screen opening of our cuttings dryer is about 0.25mm to 5mm. Then the fluids will be feed to GN H-G shale shaker, here it will make the further drying work.

Sometimes, the drilling fluids can be sent to GN H-G shale shaker directly without the vertical cuttings dryer. However, in order to reuse the drilling fluids, all of the above fluids from vertical cutting dryer or H-G shale shaker must be treated by GN decanter centrifuge. Only in this way, we can get separated the solids that larger than 5 microns.

Mud Recycling System for Core Drilling and CBM Drilling
GN Solids Control has provided many sets of mud recycling system, some of these solids control systems are designed and manufactured on customers’ particular demands.
Take one set of mud recycling system as an example, GN has provided a double function solids control system for core drilling and CBM (coal bed methane). Usually, there are large differences between core drilling mud system and CBM mud system due to these two drilling methods needs different amounts of drilling mud.
For core drilling, the mud system is usually has the treating capacity of 50 GPM, while for CBM drilling, the treating capacity of mud system is reach to 500 GPM.
And the separating demands of core drilling and CBM drilling is not the same, either. Generally speaking, the diameter of solids from core drilling mud system is less than 20 microns; on the other side, the solids’ diameter is usually larger than 20 microns.
This mud system including the following equipments:
1. Mud Cleaner：
GN mud cleaner is composed of dual layer shale shaker and desilter. The type is GNYZ 703E-8N, it has 8 hydro cyclones which are made of PU.

2. Mini Decanter Centrifuge:
The type is GNLW223. It is one baby decanter centrifuge that is designed especially for diamond core drilling.

3. Feed Pump:
Using Nemo pump to feed the decanter centrifuge, this pump is a positive displacement type which can avoid agitating when feeding. There are also some other centrifugal pumps that used to feed the desilter, as well as some pumps worked together with mixing hopper on mixing tank.
4. Mud Agitator:
For the mixing compartments, there are several mud agitators located on the tank, GN mud agitator is one cost-effective type for mud agitating.
5. Mud tank:
Here we use one mud tank with the length of 8m. All the above equipments can be fixed on this mud tank.

GN Solids Control Co. has developed many different types of solids control equipments that can be used on oil and gas industry. And GN is a very large company who can provide turn-key solids control or waste management systems for global clients.
As we all know, the oil in Canada is mainly exists in oil sands which is also called tar sands. According to the latest survey, more than 98 percent of the oil sands and conventional oil are in Alberta. If we just considering the oil reserves, then Canada would be the third largest oil country.

                           GN Vertical Cuttings Dryer
For conventional oil, there about 39 percent in Alberta, we have already known that explore and produce oil from this conventional energy. GN has provided many sets of turn-key solids control systems for world clients. Until now, COSL has used four sets of GN 1000 GPM solids control system. And GN has also provided four sets of 1000 GPM mud recycling system for Russia client.
So for this conventional oil, GN has a large room to cooperating with drilling company from Canada. And for the oil sands, depends on the exploring and producing processes, GN Solids Control can provide different equipments.
There are two ways to explore the oil sands:
1. The first way is using excavators, the surface oil sands can be can be dig and transferred to a truck, and transported to a treating and refinery factory. This cost of this way is relatively low, but the damage to lands is very large.
2. The second method is called “SAGD”, which means steam assisted gravity drainage. The other processes are quite the same as explore the conventional oil.
GN Solids Control equipments and drilling waste management systems can help to get the bitumen and protect the environment at the same time. Many solids control equipments such as decanter centrifuge, cutting dryer can be provided by us. And we also have mini decanter centrifuge, which is especially suitable for core drilling or diamond drilling.

GN Mud Guns for agitating
GN Solids Control is one of the largest companies in China to provide turnkey solids control solutions in oil and gas industries. During the past years development, GN Solids Control has already become a world famous brand in the solids control field. With the development of GN Solids America LLC and GN Solids Russia, GN will have the chance to service more and more clients, and right now GN solids control and drilling waste management systems have already been used in over 60 countries.
GN is a company that can provide whole solids control project to customers, and on the other side, GN Solids Control is manufacturing various kinds of spare parts such as mud guns, centrifugal pumps, shear pumps, submersible pumps etc. Some of these spare parts are sell very well, and after the clients have used GN solids control spare parts for a while, they come to GN for turnkey solutions because they already have the confidence about the excellent quality of GN solids control and drilling waste management systems.

Today we would like to give you a short introduction about GN Mud Guns. As we all know, GN mud guns are used for flush the corners of the fluids in mud tanks, and they are usually working together with mud agitators. When a mud agitator is keep the solids rotating in mud tank, the mud gun can help to work on the corner due the large working pressure.
There are two common types for GN mud guns, one is a fixed type (which means the mud gun is fixed on a mud tank and can only work for the specific angle), the other type is a rotating one, the mud gun can rotating by adjusting the hand lever on the top. Usually, we recommend customers to use rotating type, although it is a little expensive, it is quite convenient to use. The working length of mud gun shaft can be decided by the height of tank.