Month: May 2018

In GN assembling workshop, the solids transfer vacuum pumps ordered by a UAE client are ready for shipment. 2 months ago, the client saw GN vacuum pump by chance when surfing the internet. To learn more on this equipment, the client contacted with GN, after few days’ communication with GN sales team, client had a well understanding on the function and features of GN vacuum pump, and placed the order. 
‘I think this kind of the pump is what I am looking for since long time before, hope it can give me a help in transferring the sludge’ client told to GN sales representative. The vacuum pump is a kind of pump fully air driven. The most valuable feature of this pump is transferring high solids content sludge coming from the oilfield drilling cuttings, waste solids discharges and remains flushing slurry in oil vessel.

In some oilfield, the mud recycling system will discharge drilling cuttings to a large sludge pit first, and then excavated out for further treatment. The operators on field can use vacuum pump to do this job as the pump can suck 50 meters away and send to more than 500 meters far away. It also allows the large size solids up to 75 mm get through the pump. In drilling waste cuttings management system, this vacuum pump can transfer the cuttings to cuttings dryer or drying shaker with high efficiency.

GN has 3 models of the vacuum pump with capacity of 40m3/h, 20m3/h and 10m3/h, the latter 2 models are mobile design and small footprint so that the operator can push it easily to somewhere on site with limited area. 
Please also click below link to watch the vacuum pump working video. Any request, please feel to contact with GN.
http://gnsolidscontrol.com/video/gn-drilling-cuttings-or-sludge-vacuum-transfer-pump-working-video

In the past CIPPE 2018 this March, GN solids control showed the 1 set skid mounted oil sludge treatment unit. This unit has all necessary functional device to recover oil from oily sludge; it can be used in small flow rate oil sludge treatment system or as a demo unit for user to verify if GN’s solution can solve the problem in disposing their oil sludge. Many visitors to GN booth showed their interest to try this unit. One of the visitors contacted with GN few days after the show and placed the order for this system.

This oil sludge treatment unit is consisting of premixing procedure, 2-phase separation procedure and 3-phase separation procedure. The main technologies used are flush washing for oil demulsification and separation for different phases like oil, water and solids. The purpose is to recover as much oil as possible and achieve as less waste discharge as possible.

Feedback from customer is saying that GN skid mounted oil sludge treatment provides an effective solution for them to treat the waste oil sludge in the pit on their rig site. They are considering starting up the further cooperation with GN by placing order on GN module type oil sludge treatment system with large treating capacity.

The premixing procedure applies premixing tank with thermal system as well as the chemical dosing system. Oil sludge need to be with certain liquidity for easy transportation and mixing with chemicals.
GN Mini Shale shaker GNZS752 and 9 inch decanter centrifuge GNLW224 are the main equipment used in 2-phase separation procedure, these are GN main product that have been approved with good performance and quality, 2-phase separation is to remove as much solids as possible from the demulsified oil sludge.

Pictures here show the oil, water and solids discharged from the 3-phase separation process. A disc centrifuge is used in this step to receive the liquid discharged from decanter centrifuge. By running at a high speed, the disc centrifuge can effectively recover the oil from the slurry.

GN is able to provide large size oil sludge treatment system with larger capacity to help client to recover oil and get much benefit. For more information, please no hesitate to contact with GN.

Next month, GN will attend the GPS (Global Petroleum Show) in Calgary, Canada. Welcome to GN booth to have a look at GN’s exhibits and learn more about GN Solids Control.

Global Petroleum Show (GPS) is North America’s Leading Exhibition & Conference for oil and gas professionals. During the exhibition, large amount of business is concluded and over 50,000 trade professionals attend GPS, while more than 100 industry leading experts share their knowledge and understanding across the event’s expansive line-up of strategic and technical conference sessions.

Please refer below information and look forward to seeing you there.
Show Time: June 12-14, 2018
Show Address: Stampede Park, Calgary, Canada
GN Booth: Hall ABC 1742b

GN will show below items at GPS
1. Replacement shaker screen – drilling fluids shaker screen is used on the shale shaker for remove the coarse solids from the used drilling fluids. It is a type wear parts needed to be changed with high frequency. GN is able to provide almost all the well-known brands replacement screen. In quality, GN’s composite frame screen is proved with same performance and working lift time as original ones. In price, GN’s modern facility and advanced fabrication machine greatly reduce the cost. Choosing GN would make the users enormously reduce their drilling cost.

2. Slurry Vacuum Pump – GN new developed slurry vacuum pump could be used in transferring sludge with high solids content and high gravity. Like the drilling waste cuttings need to be further treated by cuttings dryer. It is fully air operated suitable for hazardous area and no rotating part in storing cavity for easy maintenance. 
3. Centrifugal Pump – the centrifugal pump is widely used in drilling mud recycling system as feeding pump to de-sander and de-silter, and mixing pump for the mud mixing unit. All parts of GN’s centrifugal pump are interchangeable with famous brand pump. Welcome to contact with GN for more information of wear parts.

For any appointment, visitors could send emails to sales@gnsolidscontro.com or usa@gnsolidscontro..com Visitors can also contact with our branch GN Solids America in Houston for any request.

Now GN team is attending the OTC (Offshore Technology Conference) in Houston, TX. This year GN got 2 booths there, one is located in the Center Hall with number 1369, and the other one is numbered 8000 in Arena Hall. Welcome to GN booth to learn more about GN Solids Control and have a look at GN’s new releases. GN has banner advertisement at one entrance of Arena pavilion displaying easy reach to GN booth.

1. GN Vacuum Sludge Pump
Vacuum pumpis one of the new releases GN brought to the show. This pump is an ideal solution for transferring the high solids content and high gravity sludge. It is this function make this type pump always been used in transferring the waste cuttings discharged out of the primary shale shaker to the waste cuttings management equipment for further treatment. The oil tank flushing sludge at the bottom of tank is always difficult to tank out, by using this vacuum pump, this job would become much easier.

2. GN Centrifugal Pump
Centrifugal pump is a type pump used widely in solids control system as the feeding pump to cyclone unit and mixing pump for drilling fluids. GN centrifugal pump is adopting wear-resisting material to make the pump shell and impeller to ensure the long working life and less maintenance for operators cost saving and longtime continuously working. To increase the availability of the pump, GN made the wear parts interchangeable with famous brand pump.

ecanter centrifuge and shale shaker are GN main products. For many years, per customers’ site feedback, GN is keeping improving the technology to enhance the operability of the equipment onsite. Like the ratchet for assisting the replacement of shaker screen and tightening technic on the centrifuge bowl to prevent the vibrating during transportation.

GN is open to accept suggestions and new ideas to improve on both the company management and product quality. Welcome to GN booth and have a talk with GN team. 
For any interest or inquiry to GN products and need to have a deep talk, welcome to GN office in Houston, there more stocked equipment and shaker screen are available.

GN Local support in Houston:
GN Solids America LLC
6710 Windfern Road, Houston, TX 77040
Tel: 713-878-0880

GN Solids Control will complete the manufacture of 3 sets 600 GPM mud recycling system for an asian trenchless drilling company. The drilling company already own 3 mud recycling system with GN Solids Control brand. And they are happy with the performance and after sales support. This is the main reason why the drilling contractor repeat the order for another 3 mud recycling system from GN Solids Control.

 

The trenchless drilling mud recycling system include following equipment:

1. Shale Shakers for primary solids control
2. Desilter with underflow shale shaker for second phase solids separation.
3. 40 FT size mud recycling tanks.
4. Mud Mixing Hopper
5. Centrifugal pumps for feeding desilter and mixing hopper.

The advantage of GN Trenchless Drilling Mud System:

1. Robust design shale shaker with High G force for higher capacity and better separation.
2. Composite frame shale shaker screen for bigger non-blanked area and longer screen life.
3. Polyurethane type hydro cyclone cones with abrasion resistant for longer operation life.
4. Mechanical seal centrifugal pump with spare parts interchangeable with industry popular pumps.
5. Self-contained mud system for mud recycling and mud mixing and supercharge pump to feed the drilling mud pump.
6. Slope design mud tank for easy mud tank cleaning work.
7. Walkways are foldable for fast rig down and rig up.
8. IP65 protection degree Aluminium alloy electrical control panel with famous brand electrical components.

As an international well-known brand for solids control, GN Solids Control equipment are widely used in oil gas drilling, trenchless drilling industry. Our products has been supplied to over 70 countries. We know the local regulations for the equipment safety and electrical design. We also Know the clients not only need reliable high quality equipment but also fast and good support after sales. We will provide our engineer to clients site for commissioning and training if required by clients.