Month: December 2015

GN Solids Control has been working in the
solids control equipment design and manufacturing for many years, with an
engineer team of more than 20 years experiences, GN Solids Control is familiar
with the solids
control shale shakers, and also more professional in shaker screens than
other shaker screen companies.

The shaker screen’s quality affects the
shale shaker’s performance:

1. When the screen mesh is of better
material and well sealed, the service life of each screen is longer, and
enhances the whole efficiency of shale shakers. GN Solids Control use high
quality SS304 or SS316 for mesh cloth material of shaker screen
from reliable supplier.                                             

2. the rubber chosen for the shaker screens
Is important also, if the rubber is too hard, it couldn’t serve well for
sealing and the cushion function is less active. While if the rubber is too
soft, it could be easily worn. GN has tested its shaker screens on their own
shakers and also GN clients has used GN screens on their shakers of many
brands.                                     

3. the glue used between the screen mesh
and screen frame is important also, GN Solids Control chooses
an brand from North American supplier for the glues.

4. the screen frame material and screen
frame welding determines the service life of shaker screens. For shaker screen
frames GN has 2 options, the steel frame one and the composite material one. Both
welt by professional

Now, some of GN produced shaker screens are
for GN’s own shakers, and some are ordered by old clients for other USA or
European brands. Some other equipment manufacturers ask GN to help design the
suitable structure for their customized and special screens. And GN screens are
enjoying good fame. If you have inquiry, welcome to visit our website or
contact sales directly.

GN Solids Control is China leading manufacturer
of compact design mud recycling
/ cleaning system for HDD, CBM drilling and water well drilling. GN mud
desanding plant for micro tunneling, piling and other trenchless activities is
also sold well.

GN 500 GPM mud recycling system for HDD and
water well drilling has be dispatch for Middles East. The system is catering
for mobile unit, and can be used for water well drilling, horizontal
directional drilling (HDD), Coal bed methane (CBM drilling), as well as oil and
gas drilling.

Equipment included in the 500GPM Mobile
unit mud system:

1) GNZS703E-ZD shale shaker, 1 ea

It is a linear motion shale shaker with 3
panels. The shaker is equipped with back type feeding box for a lower feeding
height. In case the mud will be flowed to shale shaker directly through
pipelines.

Features of GNZS703E shale shaker

a. It utilizes the most reliable linear
motion for a stable performance.

b. The shaker model utilize pretention
screen, Each screen mounted by 2 ea wedge for fast screen changing.

c. The shale
shaker deck of GNZS703E shaker is made from stainless steel material for a
better performance of anti-abrasive and longer lifetime.

d. The dumpling spring of the shaker is
steel material internal for more stronger and better performance of vibration
desorption. The spring external is protected with rubber sleeve to prevent
fingers involved in during operation.    

e. The vibration model is chose from
worldwide famous brand: Italy Oil or Martin.

2) GNZJ703E-8S desilter mud cleaner

It is the combination of a shale shaker
GNZS703E and 8 ea 4’’ desilter cone assembly. The 4’’ desitler cone is made
from PU material for long lifetime.

And the cone assembly is removable. In case
needed, the Operator can bolt off the desilter cone assembly and mounted a
feeder box and use it as a separator shale shaker.

3) Slurry pump 1 ea. In case mud maybe stocked
in mud pit, a slurry pump is used as backup.

3) Mud tank 1 ea. The mud
tank is equipped with container block for easy mounted and clocked on the
trailer.  

Leading in the HDD industry for drilling mud taking,
GN have her standing as a professional solids
control equipment / system provider. Not only good quality, but also an
excellent soltuion supplier. Not only offering standard systems, which most
manufactures prefer to do, also delivering customized soltions, even when most
of us still recommend the standard treatments.
GNMS500B is a middlized alternative for the 500gpm capacity required projects.
Normally for adding, we use GNMS500D, for big HDD projects, we all use
GNMS500GL. While there even now are some projects, just at the center. Not like
normal piling, just have big particles, and only have to separate the biggest
particles. None like the bigger HDD jobs, need big tank hard drive volume. For
this project, assessed the site arrangement, the client would prefer to dump
the solids squander to the end, not the inside, then we rearrange often the mud cleaner postion.
Some sort of customization on a standard system.

Features of GN HDD CBM Mud Recycling equipment
Complete line Mud System: GNMS-200GPM / GNMS-350GPM and GNMS-500 GPM /
GNMS-1000GPM / GN1500 GPM Self-Contained Mud
Recycling System.
Economical Equipments integration: Complete going mud equipments from a
individual source-GN Solids Control Manufacturing.
Fast moved compact system: Small footprint design with quickly connection for
removable components and most parts fixed when traveling meet transport
regulation.
Confident customer service: We can send each of our experienced engineers for
installment, and training up client engineers.
Mud Tanks Adaptable Options:
Skid Mounted or perhaps Trailer Mounted or Hydraulic Jack Up mud recycling
Aquaria available for your options.
For GNMS500B details, pls download all of our brochure from website:
In this project, the client is using some sort of famous Japanese bore adding
machine, and after checked the site by their industrial engineer, finally
choose to cooperate with our value.

Machinery
manufacturers cannot fulfill the customer if they don’t have an adequate
inventory for main or maybe popular requested product within their warehouse.
GN Solids Control, though already the leader involving solids control equipment
suppliers in China market, is actually trying the best to make the inventory
for main equipment in the event any urgent request from clients.
Due to the slowing down on the drilling industry, almost all of the needs on
primary solids control equipment like shale
shakers, mud cleaner even the mud
tank system are doing the used ones. That may be no doubt a cold winter for
the brand new equipment providers. As a result of consistent efforts on
solutions innovation, competitive cost, most critical the stable performance,
GN solids control still could walk in the snowstorm steadily.

You never know when the market place will get better, so , precisely what GN
did is to retain enough stock and to discover the opportunity. Just like the
old telling, the opportunity always prefers to bump the door of who has
previously made adequate preparation. Including below picture shows:

GN new warehouse keeps Up and down Cuttings Dryer unit intended for prompt
delivery
Vertical cuttings dryer unit is the key devices in drilling waste cuttings
drying system, by using this type of system, the driller could easily get a
pitless mud system to save drilling cost through recovery more fluids and also
discharge less solid squander. GNCD930
cuttings dryer model has already proved by many huge in oil industry
including Baker Hughes, Shell, CNPC, SINOPEC, Greatwall drilling, Shengli
oilfield etc . It could be manage at 900RPM to get 4 hundred G force and
1200RPM to get 750. The adjustable speed is also available.

Suppose the customer buys a cuttings dryer unit, however , absolutely no
decanter centrifuge to enhance the effluence out from the cuttings dryer? No
worry about in which, GN already thought about this specific. That is why there
are 20 products 14” centrifuge kept from the warehouse. GNLW363CG is the best
lover for GNCD930 in spend management system. Besides, this kind of model
centrifuge could also be employed in barite recovery and typical fine solids
separation. 3200rpm / 2700rpm /2200rpm, various speed for different
application, only tell GN what task you want to do, and then we can recommend
the suitable speed for you. GN’s 14” centrifuge speed could possibly be
adjusted by changing the particular pulley or even equipped with a clever PLC
variable frequency generate control panel.

If you have any kind of request on the cuttings dryer and decanter centrifuge,
simply no hesitate to take up you telephone and dial us.

The
rules of drilling industry in order to dispose the waste cuttings requests as
less squander cutting disposal as possible. That no doubt pushes the going
contractor to find a better remaining solution to avoid the disturbing
originating from of environmental protection office.
There are 2 options, although not limited, for final convenience of the
discharged waste through the drilling process or some different industrial.
One is to get hot the waste sludge to split up the solids, water along with
oil. This method is called winter desorption treatment. When the going mud is
oil based, the particular discharged waste cuttings through the primary solids
control products may include water, oil in addition to cuttings. The sludge
is actually firstly conveyed to a huge rotating drum which is often divided
into several compartments. Throughout each of the department, the heating up
temperature would be adjustable regarding the separation purpose. Often the
drum would be injected nitrogen to prevent the burning of the useful oil. The
water and necessary oil would be heated turn into gasoline and then be guided
in a cooling unit, here this and oil would liquefy to realize the separation. Often
the separated oil could be gathered for selling or applied as the fuel of the
energy desorption unit.

It is worthy of to mention is the thermal desorption is always for the waste
sludge with less water written content, otherwise the recovered acrylic value
would not cover the intake of energy like electricity along with fuel.
Differ from the energy desorption, the solidification procedure is especially
used for the water bottom part waste. The waste renforcement unit could mix
often the waste sludge and the renforcement reagent. In this process, often the
hazardous material in the waste material would be isolated as the sludge would
form into inadmissible compounds. Thus the addressed solids could be discharged
and also used for road paving and since construction material.
No matter regardless of what would be adopted, the drilling contractor would
always pre-treat the waste cuttings simply by use the waste cutting drying out
equipment to make the waste significantly dryer so that less gas will be
consumed in warming or fewer reagents can be used during solidification course
of action. The mostly used drying out equipment would involve cuttings dryer, high G push
drying shaker and waste materials decanter
centrifuge.
GN Solids Control now could supply the solidification unit and total list of
waste cuttings drying out equipment. If you are interested, this is our website
for more information.

Related Posts

• GNGH Solidification System shipped to Africa
• Mud pit drill cuttings management system for oil field drilling
• G GN cuttings solidification unit delivery to N . Africa
• GN drilling waste manage System with regard to Middle East

GN
engineer only came back from a rig construction site for the commissioning of
GN drilling waste dryer system for a Nigeria drilling firm. It is a reputable
drilling corporation. All their rigs are major oil and gas drilling rig 1500hp.
Mostly, they use OBM (oil based mud) or SOBM for drilling. WBM (water base mud)
is not typically used. So waste management system is necessary for them. Just
one the one hand, it is ask by the company for setting protection. On the other
hand, it can recuperation drilling mud for using again, and save their going
cost on chemicals regarding drilling fluids.
Drilling spend equipment GN offered to typically the Nigeria drilling company
1) Drilling
waste decanter centrifuge GNLW363C-VFD
GNLW363CG-VFD decanter centrifuge is the most popular model to get drilling waste
management arena. It is the latest design coming from GN group. It is a 12
inch variable frequency generate decanter centrifuge with utmost. speed
3900rpm.

2) Top to bottom cutting dryer GNCD930
Up and down cuttings dryer is popular together with decanter centrifuge
intended for OBM (oil base mud treatment). The VG dryer is made and designed by
GN Solids Control. GN Solids
Control is the No . one particular manufacturer for drilling waste material vertical cuttings dryer
marketing.
3) Screw pump take care of drilling waste transfer
Attach pump can transfer mud and feed for decanter centrifuge. The screw pump
GN cooperate with a A language like german company NETZSCH. All body fluids
touch material made from Metal 316L. GN can provided good quality with good
price tag.
4) Screw auger conveyer in difference sizes along with transfer length for
waste material cuttings transfer.
GN regular screw conveyer is with 16 feet length for each portion. Customer can
choose 1 portion ~ 4 section for getting length 12 ft, twenty four ft, 36 ft or
even 48 ft. Auger length have 12 in, 12 in and 18 quite a few option.

GN can delivers customized solutions on the drilling waste management field
Delightful you contact GN team freely for solution.

Related Posts

• Different Models of GN Decanter Centrifuges
• GN Decanter Centrifuge for CSG Drilling Projects
• GN Just Completed One Drill Cuttings Management System for Russian Clientele
• GN Drilling mud treatment decanter centrifuge

GN Solids Control is
a leading supplier providing solids control and also drill cuttings management
programs for global clients. Numerous large drilling company or maybe oil
service companies are utilizing GN equipments to treat often the OBM, WBM or
BINQ.
GN decanter centrifuges and also
cuttings dryers are competing equipments even when compare with UNITED
STATES brands or European manufacturers. With the establishment of GN Solids America LLC within
Houston, GN Solids Control is getting to known through more and more drilling
companies on the planet. GN also has one department company in Moscow.
Typically the America is one large sector for GN, it’s a similar for Middle
East. GN delivered more than ten units cuttings dryer to Center East in last
year. Many of these equipment s are also providing with screw conveyors and
also flushing pumps.

GN drill down cuttings management systems like these equipments:
1 . GN Vertical Cuttings Dryer: a single set
Variable speed dryer can be adjusted by the VFD feel screen. GN used well-known
brands electrical brands for instance ABB or Siemens and so forth
2 . GN Decanter
Centrifuge: 1 set
GN decanter centrifuge is a cost-effective breaking up machine in the oil and
gas location. Due to the perfect quality components, it can be used for a long
time. GN professional engineers have been updating this centrifuge from the
beginning. De dos niveles stainless steel are used for the turning bowl.
Hundreds of tungsten carbide tiles are also fixed for the screw conveyors for
while usage.
3. GN Mud Tank
Mud tank is actually fixed on a compact skid for convenient move.
four. GN Screw Conveyor: two sets
GN screw conveyors are widely used in send drill cuttings in huge density and
viscosity. The important angle is usually within thirty five degree.
5. GN Mess Pumps: 2 sets
Just one set pump for flushing the cuttings dryer just in case the screen
basket obstructed. The other set is used to help pump the drill cuttings into
the decanter centrifuge.