November 2015 – API SHAKER SCREEN

Shale Shaker & Mud Cleaner & Decanter Centrifuge stock in America

GN Solids America set office and storage
facility in Houston America all of us keep stock for shale shaker, mud cleaner along with
decanter centrifuge in Freeport to sell. All the equipment tend to be following
US standard and keep service there to have sure clients receive great service
and equipment support.

There are 2 models that will popular for US market, GNZS703 shale shaker which
is a several decks model with ability 500 GPM mud stream at 40 mesh screen
size. GNZS594 shale shaker is a 4 decks unit with capacity 600 GPM mud flow at
forty five mesh screen size that is certainly narrower and longer. Typically
the shaker deck is Q345 material and heat addressed for better performance. The
GNZS594 model can install upvc composite material screen which will prolong
screen performance life. two sets of vibrator mounted to supply G force bellow
7. 5 G through opposite rotating driven simply by 3 phase generator. a few sets
of shale shaker can share one skid to make delivery easier with regard to
convenient.

There are different style of decanter centrifuge but GNLW363 decanter
centrifuge is the most well-known model for oil and gas going solids
control system or maybe drilling waste
management the high speed centrifuge, the turning speed reaches to 3200
RPM. One set of VFD control panel can be an optional to modify centrifuge speed
0 : 3200 RPM depending on diverse condition and requirement. There are actually
tungsten carbide tiles bolted on screw impeller with regard to help protect
centrifuge attach and flexible to replace tungsten carbide tiles. The
centrifuge dish material is stainless steel intended for protection. There are
bigger as well as smaller size of decanter centrifuge for optional depending on
various drilling requirement..

GN 500GPM Mud Recycling System for HDD Client

GN Solids Control has provided many sets of mud
recycling systems for various mud control area or industries, such as HDD,
TBM Drilling, CBM Drilling, Bored Pile Drilling etc. Just in this May, GN
Solids Control just provided one set of 500GPM mud system in HDD area.
GNMS-500GL is one of the most cost-effective mud recycling systems and widely
used in the global world. GN also has some other mud systems to meet treating
capacity demands, such as 200GPM, 1000GPM. Some other customized mud recycling
systems can also be provided based on customers’ working conditions.

This GNMS-500GL mud system has been successfully working for more than 3
project s during the past 5 months. At the beginning, GN sent service engineers
for installation and debugging. For clients need training or commissioning
service, GN can also send out their engineers.
GNMS-500GL mud system includes the following main equipments: shale shaker, mud cleaner, mud
hopper, mud tank.
Some auxiliary equipment such as mud agitators, mud
mixing hoppers, centrifugal pumps are also included in this system.
GN mud recycling systems are very popular in many regions or countries, such as
South America, Africa, Middle East, Australia, India, Korean, Burma and
Indonesia etc.
With the fast development of GN Solids Control, GN mud systems are exported to
over 60 countries. Most of those GN mud systems are being used in abroad,
nearly 70% are exported from China. And with the establishment of GN Solids
America LLC, GN solids control equipments and drilling
waste management systems are widely known by North American companies.
GN Solids Control also provides decanter centrifuge, cuttings dryer, Hi-G
shaker for WBM, OBM or SBM treating. At the beginning of 2015, GN also provided
some sets of solidification unit to treat the drilling cuttings separated after
cutting dryer, centrifuge. In the near future, GN will launch a newly upgrade
cutting dryer to treat the WBM especially.

GN 350gpm HDD mud system for Sale

We have over 70%
project from oil & gas drilling. The other 30% sales amount is from
HDD/CBM/WATER WELL DRILLING application, we offer compact
mud system for this area and the feedback is very good. Recently, we have
one 350gpm standard design mud system for sale. The mud system can used for HDD
drilling / CBM drilling / water well rig drilling. The 350gpm mud system
including:

1) one mud tank with all the solids
removal equipment upsides.

2) one double
deck shaker with 4ea 4’’ desilter
cones. The drilling mud can be treated by double deck shaker first, then
centrifugal pump can feeding the drilling mud to desilter for further
treatment, after that particles above 25microns can be separated, and the
drilling mud can go to mud mixing tank with mud hopper to get correct mud
property and for reuse.

3) one mud agitator to
mixing the mud & suspending the mud

4) one mud
hopper for adding more chemicals to adjust the property of the drilling mud
before feeding for HDD rig machine.

We just have
this mud system showed in Australia show, pls see more from website:

http://www.gnsolidscontrol.com/drilling-fluids/gn-mud-recycling-system-in-2015-australia-no-dig-show

Except for 350gpm mud system, GN Solids Control can also offer other
capacity mud system from 200gpm mud system/350gpm mud system/500gpm mud
system/700gpm mud system /1000gpm mud system etc. Our technical team makes it to standard
design for all the mud system and make it easy for transportation and
operation. For details, pls read from GN website: HDD & CBM Mud Recycling System, http://www.gnsolidscontrol.com/hdd-equipment/

Except for compact mud system, GN Solids Control also offer big
capacity mud system for oil & gas drilling. We have domestic client like
COSL buy 4 sets of 1000gpm mud system for offshore drilling in year of 2014. And
also buy 1 sets 17sets mud tanks mud plant system from us in year of 2014. Pls
read more from GN website: http://www.gnsolidscontrol.com/drilling-fluids/1000hp-drilling-rig-solids-control-mud-system

Any requirements, pls contact us freely.

GN Mud Agitator and GN Mud Guns

In some degree, the mud agitators and mud
guns are more commonly used than the main solids control equipment like the shale
shakers and centrifuges, because besides the solids
control system, there is also mud plant or mixing plant. In such systems,
they use only mixing hoppers and pumps for treating the drilling fluid and the
main function of the whole system is to storage the drilling mud for the future
use.

In order to keep the drilling fluid from
being deposit to the bottom, they need mud agitators and mud guns to prevent it
from settling down. Normally, every mud agitator is matched with one mud gun,
and each 3 meters ,there is a mud agitator.

GN has variable mud guns available, some
are of smaller horse power while some are of larger horse power. Which one to
choose depends on 2 factors, the first one is the depth of the tank, the deeper
the tank is, the larger horse power of the mud agitator is needed. The second
factor is the mud condition, always, the more sticky of the mud, the larger
horse power mud agitator is needed, it means the viscosity of the mud

GNJBQ series mud agitators,
especially for the larger horse power ones, has 2 options, the single impeller
one and the double impeller one, the double impeller one is more suitable for
the deep tank situations. On the bottom of tank, GN always suggest the end user
to use bottom shaft stabilizer for limit the long shaft to be working within a
suitable range, not to deviate from the center.

The mud guns are used to help the mud
agitators to play the same role, especially for the corners of the mud tank. GNNJQ series
mud guns has 4 options, the 2 inch mud gun and the 3 inch mud gun, each
diameter has 2 options, the fixed ones and the rotary ones. Comparing with
other China brands, GN mud guns use polyurethane as nozzle material, with
longer service life. It is also the most popular choice internationally.