Month: August 2014

GN Solids Control just attended the Sixth CIPPE 2014 (from August 26th to August  28th )held in Shanghai. This year GN welcomed many old friends and recognized some new friends during this exhibition. And GN has attending this exhibition for several times.

GN Solids Control exhibited one set of high configuration Decanter Centrifuge. Many customers from abroad and home showed lots of interests to GN Decanter Centrifuge, as well as the other Solids Control equipments.

GN Decanter Centrifuge has won many customers due to the excellent performance and low price.

1. Long and reliable service due to patent design with the highest configuration and best material.
2. Duplex Stainless Steel 2205 by Centrifugal casting is the material of Bowl Cylindrical and Conical section.
3.Using Tungsten Carbide Tiles for longer life and easier replacement.
4.Using tungsten carbide alloy to protect screw flow distribution port and bowl solids discharge port.
5.The liquid discharge weir height can be easily adjusted.
6. Using tighten belt to protect the bearing assembly in transporting and delivery.
7. PLC controlled, Pressurized EX Proof VFD control cabinet.
8. For longer and reliable operation, using genuine SKF bearing.

Compared with the other brands at home or abroad, it is definitely the GN Decanter Centrifuge has many obvious good characters, and GN Decanter Centrifuge is the most cost-effective product.

During these years glorious development, GN Solids Control has many successful experiences in this field. Customers from America, Austria, Russia, India and Indonesia etc have given remarkable compliments to GN equipments. GN has keep growing, and GN never stop on the way to purse the satisfying of customers’ changing demands.

GN Solids America equipment is liquid/solids two phase separation equipment. The application locations include things like oil & gas drilling mud solids control; horizontal directional drilling mud solids control; and underground project which require drilling mud for lubrication and lower down equipment working temperature.

GN Solids Control have shipped many mud desanding plant to overseas market. The mud desanding plant is used for underground project, bored pile drilling. The customer is from over 60 countries and locations, like South-East Asia countries ( Singapore, Indonesia, India, Thailand, Myanmar, Philippines, etc.), Middle East countries ( Kuwait, Iraq, Iran, Israel, Saudi Arabia, Oman etc.), Oceania countries ( Australia, New Zealand etc.)

Recently, we got one pile desanding plant purchase order from customer in Thailand, they are local famous bored pile drilling (http://www.gnsolidsamerica.com/drilling-mud-circulating-system.html) underground service company. After they come to GN factory, they are impressed with GN factory and GN marketing cases. The details of GN mud desanding plant including below technical specs:
One set double deck mini mud cleaner, including down deck 2 panel shaker screen (750X900mm for each screen) and up deck 1 panel shaker screen (700X1250mm) and 4 ea desilter cones (treating capacity ).
Two sets centrifugal pump, one set for feeding USA desilter cyclone, one set for mixing hopper. One set mud tank to hold all above equipment into one compact skid.

GN Solids America is professional for manufacturing of mud desanding plant, pls contact us for further information.

A complete set of GN 500 GPM mud tank technique has been prepared for delivery to Middle East. It is a two-tank mud approach: a single mud cleaning tank program and 1 mud mixing tank system, specially created for HDD drilling applications.

The mud cleaning tank process consist a GNZS703 US shaker screen for the initial stage significant solids particles separation and a GNZS703-1S8N mud cleaner for the separation of solids particles over 20 microns.
The mud mixing tank technique features a mud jet mixer and mud agitators to manage mud specifications. Cuttings Dryer might be sucked from this tank and re-circulate towards the down hole.
GN America has broadly sensible encounter inside the mud tank system design and style and style and manufacturing. Definitely need to you’ve got any request, please be cost-free to let us know, or you can click the link below to visit our website: http://www.gnsolidsamerica.com

As one of the most important part of Shale Shaker, the Shaker Screen are playing more and more important role in solids control. It’s now believed that a good shaker screen can separate sand & silt from the drilling fluids, and the shaker is much more important than the vibrator sometimes .

GN Shale Shaker Screen has variety types that can fulfill the demand of different brands shale shaker usage. For special shaker screen mesh, GN Shale Shaker Screen engineer can design and manufacture on customers’ demands.

Now GN Solids Control can provide the screens mesh from API 20 to API 400. Based on site experience, we would like to give you more introductions to our Pyramid Screens.

Compared with the flat plate screen, the pyramid screen has the following good characters:

1. Larger Shaker Capacity:
The total amount of usable API on-blanked screen area can increase by 105% when use pyramid screen on shale shaker. Fluids drilling management capacity will be more than 25%.
2. Better Permeability:
Due to corrugated screen’s trough, the working area is larger, so when the gravity and vibration forces the drilling solids into the screen, it allowing more fluid to pass through the top of the screen.
3. Drier Cuttings:
A more effective and faster drying capability will be occurred because of pyramid screens minimize fluid loss by dispersing thinner layers of fluid over an increased screen area.
4. Faster Fine Screen:
Utilizing Pyramid screen enable shakers to screen 2 to 3 mesh sizes finer than traditional perforated plate flat screen panels. This maximizes the solids removal efficiency of the shaker.
5. Maker Fine Separations:
Pyramid screens are capable of making separations as fine as 43 microns.
6. Fits Existing Shakers:
Pyramid screens fit all GN shale shakers and the other famous brands shale shakers, thus allowing for the most efficient use of existing equipment. There is no need to modify or replace existing equipment.

However, flat plate screen still has variety usage in today’s solids control filed. Sometimes, it’s more cost effective to use flat screen.Tha’s another thing we’re going to talk later.

Much more and more individuals are speaking about a zero discharge method for drilling rigs. Then, what is a zero discharge drilling mud system? In my opinion, it incorporates not merely the mud recycling program, but also the drilling waste management program. GN Solids America, as the leading manufacturer in both pointed out systems, can give zero discharge method.
Zero discharge technique right here offers two functions: in 1st step, drilling mud recycling method, drilling cuttings contained in mud are separated out, and clean mud returns to the drilling rig. 2ndly, drilling cuttings are collected and additional treated by waste management method, in which dryer cuttings are separated out. Sometimes, there is dewatering technique located right after the standard waste management.
A total GN Zero Discharge Program consists following sections:
1. GN Drilling Mud Recycling System, also regarded as solids control method. This configuration employs shale shaker tank- GNZS shale shakers, GNZCQ vacuum degasser, active tank-GNZJ desander & desilter and GNLW452 Decanter Centrifuge for separating weighted materials, mixing tank-GNSLS jet mud mixer, and storage tanks. All tanks are equipped with GNNJQ mud guns and GNJBQ mud agitators, and the pipelines and pumps are produced by GN Solids America also.
2. GN desilter method,GN Solids America is the 1st China solids control company who makes both high speed centrifuge GNLW363 and desilter,and desilter is tested in factory and jobsite, efficient for each WBM and OBM. GN Solids America also have High-G drying shaker GNZS594HGE available especially in waste management systems for WBM.
3. GN Dewatering Technique, right here we use 1 set of GNLW363 high speed decanter centrifuge and a flocculent unit.
In all, GN company is capable of providing the closed loop of zero discharge system for drilling rigs.
about desilter posted before:

THE GN DESILTER IS PERFECT TO CUT DOWN THE SOLIDS IN MUD PROGRAM.

Driven by the economy incentive and public inappropriate behavior, most of our lake, pond, river even the ocean are polluted by a heap of rubbish. Government did not realize the negative influence until now. There is no doubt that dredge slurry system plays a vital role in recycle the contaminated water and return our gorgeous earth.

IMS

IMS Division of Liquid Waste Technology, LLC is the company, which providing submersible pumps and one-truck transportable dredges to the waste water industry. IMS boat will float on the river to recycle mud, sand ,silt, plastic and debris.

GN Solids Control

GN Solids Control dredge slurry system is actually processing the huge volume water from 1000 GPM to 3000GPM. Powerful treating capacity will quickly complete one project in few months. Our shale shaker, desander, desilter unit have the stable working performance for the slurry recycle, maximum separate all kinds of big rocks, unexpected sand and silt. Our slurry systems are exported over all over the world and gain the positive reputation.

Give us your project information, we will give you the best solution.

Desilter is a GN project：http://apishakerscreen.com/post/84582769916/desilter-is-a-gn-project