Month: April 2014

GN Solids Manage received the 6 models Mud Agitator agreement through a good United states Client. This particular client is extremely cautious about the high quality. These people delivered 3rd party inspction organization to look at the manufacturing plant prior to sketching the actual purchase as well as delivered inspectors in order to examine the actual freight following complete.

All of the Mud Agitators tend to be along with IEC FORMER MATE licensed engines to satisfy their own high quality needs. GN Mud Agitator blend the actual postpone the actual solids utilizing each axial as well as radial moves, as well as through the use of reduced shear mixers in order to postpone as well as blend dirt chemicals particle dimension destruction as well as polymer bonded shear. In contrast to centrifugal sends or even dirt weapons. The actual GN Mud Agitator is actually fairly reduced shear as well as reduced power gadget, therefore it’s simple to run as well as affordable to keep. This can make sure that dirt chemicals tend to be homogeneously combined to avoid lifeless places. GN Mud Agitator could keep the actual energetic dirt program moving even if the actual sends tend to be disengaged as well as keep your weighting brokers within suspension.

These types of Mud Agitators is going to be quickly deliverd to the useful client. All of us anticipate their own utilization suggestions. In the event that you are looking at the items make sure you don’t wait to make contact with all of us,please visit us.

A trustworthy online store will provide cheap Mud Agitator to the buyers. It will be great to have a glamorous appearance with the right selection of a equipment. This can make a supplier look presentable and honest, place the order right now. Our official website will provide you with more quality services to welcome your arrival, click here to enter: http://www.gnsolidsamerica.com/company-profile.html

GN Solids Manage shaker screen tend to be exported in order to the united states along with top quality as well as competetive cost. GNLW363 Sequence shaker screen is actually GN’s most widely used design that operates perfectly within The united states Marketplace.

LW sequence is really a regular shaker screen type of the organization, perfect option with regard to isolating contaminants within drilling dirt. Shaker screen individual the actual suspending liquids while using theory associated with centrifugal motion; the actual suspending liquids is actually pressed to the rotor drum with the inlet tube and also the liquid pit from the spin out of control feeder. Intoxicated by centrifugal pressure, strong stage contaminants tend to be pressed towards the inner walls from the drum, after that towards the naked foreign trade from the little finish from the drum as well as excreted. However the liquids is actually excreted in the flood pit from the big finish. This kind of period is actually to have the objective of constant splitting up. Higher pace shaker screen work with regard to splitting up. The next graph display just about all the centrifuges specs. If you want to know more about us, pls visit our official website.

GN Solids Manage exported more than a hundred and fifty shaker screen each year in order to worldwide. GN Solids offers complete answer upon drilling waste materials administration as well as solids cotnrol within gas and oil drilling. All of us may constantly supply the clients along with top quality items as well as following product sales providers. The shoppers are always in search of effective ways to save money. I accomplish this objective with the help of discount shaker screen for my factory. This particular online store came to my rescue and offered the outfit at an incredibly reasonable price. Welcome to visit our home page,pls click here: http://www.gnsolidsamerica.com/shale-shaker-screen.html

 

GN solids control may style as well as produce dirt container, drinking water container as well as essential oil container associated with FG(square), ZG(taper), YG(round) kind based on the customers needs. The actual container is organised associated with solar panel or even corrugation; the actual container, pathway as well as steps consists of skid-proof metal linen as well as galvanized metal linen made by expert producers; the actual safeguard train consists of sq . pipe, along with barrier-free as well as foldable framework, steady placing as well as conneting. There’s drinking water tube collection to wash the actual container as well as tools; We are able to help to make regular fine sand evidence as well as rain-proof get rid of, as well as we are able to arranged heating unit tube collection within the container.

Kind FG as well as ZG Dirt Container created as well as  desander desilter through the organization is actually devided in to Sq . container as well as Cone-shaped container based on the form of container base. Your body from the container consists of welding the actual metal dish as well as area, while using toned cone-shape framework or even the actual corrugated framework. The actual dirt container area and also the passing are constructed with the actual sliding proof metal dish as well as linearity netted metal dish that is made by the actual expert manufacturing plant, the actual dirt tanks are constructed with along side it metal tube, all the framework could be collapsed without having hurdle as well as pegged dependably. The top associated with container has drinking water pipeline with regard to cleansing the top as well as gear about the dirt container, all of us make use of drenched zinc digesting for that netted metal dish. The actual step ladder consists of the actual funnel metal to consider obligation your body, the actual feet panel consists of the actual linearity netted metal dish. The actual two-sided safeguard train tend to be set up the actual secure suspension connect. The actual dirt container was created the conventional shanty to avoid the actual fine sand and also the rainfall. The actual pipeline is actually set up within the container in order to protect the actual heated air warmth.

 

GN Solids  desander  has been around this particular section of gas and oil. All of us offers exported in order to more than 20 nations with regard to dirt d . please get in touch with GN

Desander  : http://www.gnsolidsamerica.com/desander.html

Solids Control rotating assembly guard consists of the semi-circular cover and vessel. It is a stainless steel case mounted on the skid. The rotating assembly can be wrapped in the vessel which can divert the liquid and solids discharge to their respective outlets and can ensure the safety. The semi-circular cover is hinged and can turn 95 degree for inspection and maintenance. For avoid mud flow off from discharge solid port during high speed rotating is fit compartments in the cover and vessel. About us, if you want to buy our products, pls click here http://www.gnsolidsamerica.com you can get more information.

Solids Control feed tube is a stainless steel tube approximately 54mm OD and 1140mm long. It extends into the bowl and conveyor through the hollow shaft on the conical end of the bowl. Mud is introduced into the centrifuge through the feed tube. The feed tube is fixed on the bracket. Its end fits a main valve, a feed water valve, a feed hose connector and a feed water connector. The main valve controls mud flow, feed water valve controls cleaning water flow. The feed hose has about 2.5m long.

Find a best solids control from factory collection at gnsolidsamerica.com. They offer products in the core categories of industry, solids control and relevant product. All the Solids Control equipment are perfectly yet quite affordable.

desander cone, desilter cone, hydrocyclone separator, solids controlPosted through George Hydrocycloe is actually an essential a part of solids manage, Drilling mud system ,mud system .usually the 2nd as well as 3rd stage from it we. at the. desander as well as desilter. Hydrocyclone separator is actually mentioning the actual desander cone as well as desilter cones.

Primary aspects of hydrocyclone separator

The actual desander cone as well as desilter cones each one is additionally known because hydrocyclone cones, cones tend to be essentially individual the actual solids through drilling liquids. The actual splitting up procedure is actually completed by using centrifugal causes. The actual Cones are constructed with higher durameter polyurethane along with optionally available metal inserts, that make sure constant efficiency,hydrocyclone separator.

The way the hydrocyclone separator functionsOnce the drilling dirt blend had been pumped towards the cones, using the centrifugal pressure the actual blend had been pressured to maneuver, after which the actual drilling reducing and also the dirt had been divided.the way the hydrocycle separator functions

Working Theory associated with hydrocyclone separator

Deoiling liquid/liquid hydrocyclones are utilized to split up 2 fluids associated with varying densities, at the. grams. essential oil through drinking water. Generally powered through procedure stress, greasy drinking water makes its way into the actual collection with the inlet towards the involute step and it is aimed in order to circulation across the lining walls. Pressured lower the actual lining, the actual liquid speeds up within the narrowing cross-section, as well as causes necessary to individual the actual essential oil tiny droplets tend to be created.

Centrifugal causes behaving on the actual weightier drinking water stage make it migrate towards the walls from the tapered area. The actual lighter in weight essential oil stage is actuallyout of place due to this particular as well as types the main, low-pressure primary that is eliminated by way of the actual refuse. The actual external thoroughly clean drinking water vortex leaves by way of the actual underflow.

 More information review here :

http://www.gnsolidsamerica.com/drilling-mud-circulating-system.html

Apart from for that Decanter Centrifuge, within HARD DISK DRIVE solids manage program, Decanter Centrifuge may also accustomed to give food to the actual dirt in order to shale shaker. Which is situated outdoors container area, various along with essential oil drilling rig, there isn’t any pipeline to steer the actual dirt straight to the actual shaker. Frequently, we’re able to visit a dirt swimming pool, what we should require perform is actually move the actual dirt towards the shaker through the Decanter Centrifuge. It’s set up using the engine upwards as well as Decanter Centrifuge mind downwards dropped to the dirt. It’s procedure steady as well as perform effective.

 Within choice the actual Decanter Centrifuge, we ought to the majority of spot the parameter associated with circulation as well as raise. Circulation may be the dealing with capability inside device period (alway 1 hour), as the raise may be the elevation the actual Decanter Centrifuge might consider the actual dirt in order to. GN might provide numerous design Decanter Centrifuge according to these types of guidelines, to learn more relating to this kind Decanter Centrifuge, simply really feel liberated to connection with all of us.If you want to buy GNsolidsamerica company’s products, please click here to know more information: http://www.gnsolidsamerica.com/decanter-centrifuge.html

High G Dryer Shale Shaker

 One of the GN Major products is GN High G Drying Shale ShakerGN High G Force Dryer shaker is design for drying the cuttings from the primary solids control equipment, recover silts and ultra-fine sands, provide solids in a consistently stackable and conveyable form and requires no expensive chemicals or polymers.

Oil & Gas Drilling Industry complete products

• Solids Control System Package  – Almost every drilling rig needs to be equipped with a Solids Control System Package. The Solids Control System is for cleaning the drilling fluids, so as to keep the balance of the drilling fluids that the drilling fluids may be reused the in the operation.

 

GN High G Drying Shale Shaker Features & Benefits

1. GN High G Drying Shale Shaker High G Force adjustable up to 8 G. for flexibility for different applications
2. Big Volume with 3.2㎡ Screen area for high capacity treatment
3. GN High G Drying Shale Shaker Wedged type screen locking for  fast changing
4. Italy Oli Brand Motor or Italvibras Brand Motor with less maintenance.
5. GN High G Drying Shale Shaker Deck Adjustable While Working from -1 degree to 5° for flexiblity
6. GN High G Drying Shale Shaker Simple Design with Linear Motion for reliable performance.
7. Rubber and Steal Composite Material Spring for longer Life

Routine maintenance will ensure maximum life and trouble-free operation. While the maintenance schedule presented in this section is not rigid, modifications should be based on experience with operating the Mud Agitator at your facilities. A maintenance log should be kept to help establish a routine maintenance schedule, as well as to monitor and adjust the schedule as necessary throughout the equipment’s life. Consider the following factors when establishing a maintenance schedule:
• Duty cycle
• Ambient temperature
• Operating environment
ROUTINE MAINTENANCE
The following maintenance routine must be performed at least daily, or each shift if possible.
These activities may be performed while the degasser is operating.
The table below contains the recommended maintenance schedule for the drilling waste management . For
additional maintenance instructions such as troubleshooting and parts replacement, refer to the
manufacturer’s literature in Section 12 – Supplier Data.
Inspection
Clean and inspect motor approximately every 500 hours of operation or every 3 months,
whichever comes first, using the following procedure:
1. Clean the motor and ventilation openings. Check that motor interior and exterior are free of
dirt, oil, grease, water, or other contaminant. Proper ventilation prevents overheating and
premature failure.
2. Using a Megger, check insulation resistance of motor winding periodically, and immediately
investigate cause of any significant drop in insulation resistance.
3. Check that all electrical connections are secure.
Bearing Lubrication
The upper motor bearing should be lubricated every 12,000 hours. The following lubricants are
approved for motor lubrication:
Exxon Mobil Polyrex EM Pennzoil Pen 2 Lube RykonPremium #2
Texaco Polystar Chevron SRI
For additional assistance and information on lubrication requirements, refer to the manufacturer’s
documentation in Section 12 – Supplier Data

GNZS752 cuttings dryer can fix different meshes screen. This equipment can use 10-200mesh screen. Usually, when the shale shaker is first stage solids control equipment the shaker screen can be 30-100mesh. When the mud system is a part of desilter, the screen can be 80-200mesh.

 Drilling waste management can among manufacturer engineer, user, and contractor discussion. Replacement screen should be selected specially from manufacturer.

 Shaker deck angle adjustment refer to fig 2.  There are lifter, pipe, lifter pipe, scale indicator, scale, connection plate, etc. When we make adjustment, handle wheel rotary by clockwise, shaker deck angle will be larger; handle wheel rotary by anti clockwise shaker deck angle will be less.

 Gnsolidsamerica is the author of the article on cuttings dryer and  Drilling waste management,find more information about mud system,you can directly visit http://www.gnsolidsamerica.com/vertical-cuttings-dryer.html

Mud Cleaner for sale system,See Drawing 7 for wiring diagram of Model LW455-842N and LW355-1250N Mud Cleaner, Model LW600-945N’s and varispeed centrifuge’s is in another book, star-delta starting is adopted in this kind of centrifuge, but other principle is the same as Model LW450-842N. start-up order is: Auxiliary motor-main motor-motor of mud filling pump. You must start the machine in this way, otherwise no act take place, stop order is: motor of mud filling pump- main motor 5 min. later Auxiliary motor. 1. Installation, Mud Cleaner Instruction: 4.1 Installation Attached Drawing 1 is structure and Installation schematic diagram of the centrifuge 4.1.1 In order to fully mix recovered liquid, centrifuge should be installed on the top of No.2 tank or any other suitable place, horizontally and firmly. This is most important for recovering charged materials from charged mud. 4.1.2 The four legs of the centrifuge support should be mounted on hard-steel tank’s surface. Please lay channel iron(≥14#) on it if the surface is too mild, then mount the support’s legs on the channel iron. 4.1.3 Sand discharged groove should be popped out of the tank, and water supply pipe should be joined with the groove. The overflow opening of the centrifuge flows vertically to the reflux flume, underflow opening must have a slant of more than 60° in order to ensure that mud is drained off from the centrifuge smoothly. 4.1.4 Mud filling pump should be mounted on a proper position at the back of the sand-desander and slurry-desander, then connect the mud supply hose and mud-feed pipe by a union. 4.1.5 Connect the flushing lines and split-flow lines on mud-feed pipe and box body. 4.1.6 Power switching box should be installed for the centrifuge control system. Forbidden to connect the mains with the control box directly so as to ensure safety. 4.2 Debugging of the centrifuge 4.2.1 Remove any debris which may affect centrifuge running. 4.2.2 Check the strain of the band. 4.2.3 Rotate the pulley of main motor Mud Cleaner manually, check if any obstruction exist between rotating bowl and box or feed pipe ,remove the obstacles if any. 4.2.4 Start auxiliary motor, at the same time, fill some fresh water into the centrifuge through flushing adapter, then run for one minute. because centrifuge has been analogue status tested before delivery, so a thin layer of wall cake which can’t be discharged is stuck on the inner surface of the drum. Part of wall cake will peel off because of vibration during transportation, lead to unbalance of the drum. Serious vibration even stop(caused by main motor’s thermal protection) will occur if you start main motor to rotate in high-speed now. Fill some water in and rotate the auxiliary motor, then peeled wall cake will be soaked and redistributed, and vibration will be eliminated when starting the centrifuge for the first time. The same work should be done if the Mud Cleaner hasn’t been used for a long time,you can refer to here to visit.