{"id":36,"date":"2015-12-07T03:11:16","date_gmt":"2015-12-07T03:11:16","guid":{"rendered":"http:\/\/www.apishakerscreen.com\/gn-drilling-waste-decanter-centrifuge-for-1500hp\/"},"modified":"2016-05-12T16:54:49","modified_gmt":"2016-05-12T08:54:49","slug":"gn-drilling-waste-decanter-centrifuge-for-1500hp","status":"publish","type":"post","link":"http:\/\/apishakerscreen.com\/index.php\/2015\/12\/07\/gn-drilling-waste-decanter-centrifuge-for-1500hp\/","title":{"rendered":"GN Drilling waste decanter centrifuge for 1500hp rig"},"content":{"rendered":"

GN
\nengineer only came back from a rig construction site for the commissioning of
\nGN drilling waste dryer system for a Nigeria drilling firm. It is a reputable
\ndrilling corporation. All their rigs are major oil and gas drilling rig 1500hp.
\nMostly, they use OBM (oil based mud) or SOBM for drilling. WBM (water base mud)
\nis not typically used. So waste management system is necessary for them. Just
\none the one hand, it is ask by the company for setting protection. On the other
\nhand, it can recuperation drilling mud for using again, and save their going
\ncost on chemicals regarding drilling fluids.
\nDrilling spend equipment GN offered to typically the Nigeria drilling company
\n1) Drilling
\nwaste decanter centrifuge<\/a> GNLW363C-VFD
\nGNLW363CG-VFD decanter centrifuge is the most popular model to get drilling waste
\nmanagement<\/a> arena. It is the latest design coming from GN group. It is a 12
\ninch variable frequency generate decanter centrifuge with utmost. speed
\n3900rpm.<\/p>\n

<\/figure>\n

\n2) Top to bottom cutting dryer GNCD930
\nUp and down cuttings dryer is popular together with decanter centrifuge
\nintended for OBM (oil base mud treatment). The VG dryer is made and designed by
\nGN Solids Control<\/a>. GN Solids
\nControl is the No . one particular manufacturer for drilling waste material vertical cuttings dryer
\nmarketing.<\/a>
\n3) Screw pump take care of drilling waste transfer
\nAttach pump can transfer mud and feed for decanter centrifuge. The screw pump
\nGN cooperate with a A language like german company NETZSCH. All body fluids
\ntouch material made from Metal 316L. GN can provided good quality with good
\nprice tag.
\n4) Screw auger conveyer in difference sizes along with transfer length for
\nwaste material cuttings transfer.
\nGN regular screw conveyer is with 16 feet length for each portion. Customer can
\nchoose 1 portion ~ 4 section for getting length 12 ft, twenty four ft, 36 ft or
\neven 48 ft. Auger length have 12 in, 12 in and 18 quite a few option.<\/p>\n

GN can delivers customized solutions on the drilling waste management field
\nDelightful you contact GN team freely for solution.<\/p>\n

Related Posts<\/p>\n